table of contents for research report

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• Dissertation Table of Contents in Word | Instructions & Examples

Dissertation Table of Contents in Word | Instructions & Examples

Published on May 15, 2022 by Tegan George . Revised on July 18, 2023.

The table of contents is where you list the chapters and major sections of your thesis, dissertation , or research paper, alongside their page numbers. A clear and well-formatted table of contents is essential, as it demonstrates to your reader that a quality paper will follow.

The table of contents (TOC) should be placed between the abstract and the introduction . The maximum length should be two pages. Depending on the nature of your thesis , paper, or dissertation topic , there are a few formatting options you can choose from.

Download Word doc Download Google doc

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

What to include in your table of contents, what not to include in your table of contents, creating a table of contents in microsoft word, table of contents examples, updating a table of contents in microsoft word, other lists in your thesis, dissertation, or research paper, other interesting articles, frequently asked questions about the table of contents.

Depending on the length of your document, you can choose between a single-level, subdivided, or multi-level table of contents.

• A single-level table of contents only includes “level 1” headings , or chapters. This is the simplest option, but it may be too broad for a long document like a dissertation.
• A subdivided table of contents includes chapters as well as “level 2” headings, or sections. These show your reader what each chapter contains.
• A multi-level table of contents also further divides sections into “level 3” headings. This option can get messy quickly, so proceed with caution. Remember your table of contents should not be longer than 2 pages. A multi-level table is often a good choice for a shorter document like a research paper .

Examples of level 1 headings are Introduction, Literature Review , Methodology , and Bibliography. Subsections of each of these would be level 2 headings, further describing the contents of each chapter or large section. Any further subsections would be level 3.

In these introductory sections, less is often more. As you decide which sections to include, narrow it down to only the most essential.

Including appendices and tables

You should include all appendices in your table of contents. Whether or not you include tables and figures depends largely on how many there are in your document.

If there are more than three figures and tables, you might consider listing them on a separate page. Otherwise, you can include each one in the table of contents.

• Theses and dissertations often have a separate list of figures and tables.
• Research papers generally don’t have a separate list of figures and tables.

Don't submit your assignments before you do this

The academic proofreading tool has been trained on 1000s of academic texts. Making it the most accurate and reliable proofreading tool for students. Free citation check included.

Try for free

All level 1 and level 2 headings should be included in your table of contents, with level 3 headings used very sparingly.

The following things should never be included in a table of contents:

• Your acknowledgements page
• Your abstract
• The table of contents itself

The acknowledgements and abstract always precede the table of contents, so there’s no need to include them. This goes for any sections that precede the table of contents.

To automatically insert a table of contents in Microsoft Word, be sure to first apply the correct heading styles throughout the document, as shown below.

• Choose which headings are heading 1 and which are heading 2 (or 3)!
• For example, if all level 1 headings should be Times New Roman, 12-point font, and bold, add this formatting to the first level 1 heading.
• Highlight the level 1 heading.
• Right-click the style that says “Heading 1.”
• Select “Update Heading 1 to Match Selection.”
• Allocate the formatting for each heading throughout your document by highlighting the heading in question and clicking the style you wish to apply.

Once that’s all set, follow these steps:

• Add a title to your table of contents. Be sure to check if your citation style or university has guidelines for this.
• Place your cursor where you would like your table of contents to go.
• In the “References” section at the top, locate the Table of Contents group.
• Here, you can select which levels of headings you would like to include. You can also make manual adjustments to each level by clicking the Modify button.
• When you are ready to insert the table of contents, click “OK” and it will be automatically generated, as shown below.

The key features of a table of contents are:

• Clear headings and subheadings
• Corresponding page numbers

Check with your educational institution to see if they have any specific formatting or design requirements.

Prevent plagiarism. Run a free check.

Write yourself a reminder to update your table of contents as one of your final tasks before submitting your dissertation or paper. It’s normal for your text to shift a bit as you input your final edits, and it’s crucial that your page numbers correspond correctly.

It’s easy to update your page numbers automatically in Microsoft Word. Simply right-click the table of contents and select “Update Field.” You can choose either to update page numbers only or to update all information in your table of contents.

In addition to a table of contents, you might also want to include a list of figures and tables, a list of abbreviations, and a glossary in your thesis or dissertation. You can use the following guides to do so:

• List of figures and tables
• List of abbreviations

It is less common to include these lists in a research paper.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract in the table of contents.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, July 18). Dissertation Table of Contents in Word | Instructions & Examples. Scribbr. Retrieved August 12, 2024, from https://www.scribbr.com/dissertation/table-of-contents/

Is this article helpful?

Tegan George

Other students also liked, how to write an abstract | steps & examples, how to write a thesis or dissertation introduction, how to write effective headings, get unlimited documents corrected.

✔ Free APA citation check included ✔ Unlimited document corrections ✔ Specialized in correcting academic texts

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• Dissertation Table of Contents in Word | Instructions & Examples

Dissertation Table of Contents in Word | Instructions & Examples

Published on 15 May 2022 by Tegan George .

The table of contents is where you list the chapters and major sections of your thesis, dissertation, or research paper, alongside their page numbers. A clear and well-formatted table of contents is essential, as it demonstrates to your reader that a quality paper will follow.

The table of contents (TOC) should be placed between the abstract and the introduction. The maximum length should be two pages. Depending on the nature of your thesis, dissertation, or paper, there are a few formatting options you can choose from.

Download Word doc Download Google doc

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

What to include in your table of contents, what not to include in your table of contents, creating a table of contents in microsoft word, table of contents examples, updating a table of contents in microsoft word, other lists in your thesis, dissertation, or research paper, frequently asked questions about the table of contents.

Depending on the length of your document, you can choose between a single-level, subdivided, or multi-level table of contents.

• A single-level table of contents only includes ‘level 1’ headings, or chapters. This is the simplest option, but it may be too broad for a long document like a dissertation.
• A subdivided table of contents includes chapters as well as ‘level 2’ headings, or sections. These show your reader what each chapter contains.
• A multi-level table of contents also further divides sections into ‘level 3’ headings. This option can get messy quickly, so proceed with caution. Remember your table of contents should not be longer than 2 pages. A multi-level table is often a good choice for a shorter document like a research paper.

Examples of level 1 headings are Introduction, Literature Review, Methodology, and Bibliography. Subsections of each of these would be level 2 headings, further describing the contents of each chapter or large section. Any further subsections would be level 3.

In these introductory sections, less is often more. As you decide which sections to include, narrow it down to only the most essential.

Including appendices and tables

You should include all appendices in your table of contents. Whether or not you include tables and figures depends largely on how many there are in your document.

If there are more than three figures and tables, you might consider listing them on a separate page. Otherwise, you can include each one in the table of contents.

• Theses and dissertations often have a separate list of figures and tables.
• Research papers generally don’t have a separate list of figures and tables.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

All level 1 and level 2 headings should be included in your table of contents, with level 3 headings used very sparingly.

The following things should never be included in a table of contents:

• Your acknowledgements page
• Your abstract
• The table of contents itself

The acknowledgements and abstract always precede the table of contents, so there’s no need to include them. This goes for any sections that precede the table of contents.

To automatically insert a table of contents in Microsoft Word, be sure to first apply the correct heading styles throughout the document, as shown below.

• Choose which headings are heading 1 and which are heading 2 (or 3!
• For example, if all level 1 headings should be Times New Roman, 12-point font, and bold, add this formatting to the first level 1 heading.
• Highlight the level 1 heading.
• Right-click the style that says ‘Heading 1’.
• Select ‘Update Heading 1 to Match Selection’.
• Allocate the formatting for each heading throughout your document by highlighting the heading in question and clicking the style you wish to apply.

Once that’s all set, follow these steps:

• Add a title to your table of contents. Be sure to check if your citation style or university has guidelines for this.
• Place your cursor where you would like your table of contents to go.
• In the ‘References’ section at the top, locate the Table of Contents group.
• Here, you can select which levels of headings you would like to include. You can also make manual adjustments to each level by clicking the Modify button.
• When you are ready to insert the table of contents, click ‘OK’ and it will be automatically generated, as shown below.

The key features of a table of contents are:

• Clear headings and subheadings
• Corresponding page numbers

Check with your educational institution to see if they have any specific formatting or design requirements.

Prevent plagiarism, run a free check.

Write yourself a reminder to update your table of contents as one of your final tasks before submitting your dissertation or paper. It’s normal for your text to shift a bit as you input your final edits, and it’s crucial that your page numbers correspond correctly.

It’s easy to update your page numbers automatically in Microsoft Word. Simply right-click the table of contents and select ‘Update Field’. You can choose either to update page numbers only or to update all information in your table of contents.

In addition to a table of contents, you might also want to include a list of figures and tables, a list of abbreviations and a glossary in your thesis or dissertation. You can use the following guides to do so:

• List of figures and tables
• List of abbreviations

It is less common to include these lists in a research paper.

All level 1 and 2 headings should be included in your table of contents . That means the titles of your chapters and the main sections within them.

The contents should also include all appendices and the lists of tables and figures, if applicable, as well as your reference list .

Do not include the acknowledgements or abstract   in the table of contents.

To automatically insert a table of contents in Microsoft Word, follow these steps:

• Apply heading styles throughout the document.
• In the references section in the ribbon, locate the Table of Contents group.
• Click the arrow next to the Table of Contents icon and select Custom Table of Contents.
• Select which levels of headings you would like to include in the table of contents.

Make sure to update your table of contents if you move text or change headings. To update, simply right click and select Update Field.

The table of contents in a thesis or dissertation always goes between your abstract and your introduction.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

George, T. (2022, May 15). Dissertation Table of Contents in Word | Instructions & Examples. Scribbr. Retrieved 12 August 2024, from https://www.scribbr.co.uk/thesis-dissertation/contents-page/

Is this article helpful?

Tegan George

Other students also liked, dissertation title page, how to write an abstract | steps & examples, thesis & dissertation acknowledgements | tips & examples.

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

Chapter 11: Presenting Your Research

Writing a Research Report in American Psychological Association (APA) Style

Learning Objectives

• Identify the major sections of an APA-style research report and the basic contents of each section.
• Plan and write an effective APA-style research report.

In this section, we look at how to write an APA-style empirical research report , an article that presents the results of one or more new studies. Recall that the standard sections of an empirical research report provide a kind of outline. Here we consider each of these sections in detail, including what information it contains, how that information is formatted and organized, and tips for writing each section. At the end of this section is a sample APA-style research report that illustrates many of these principles.

Sections of a Research Report

Title page and abstract.

An APA-style research report begins with a  title page . The title is centred in the upper half of the page, with each important word capitalized. The title should clearly and concisely (in about 12 words or fewer) communicate the primary variables and research questions. This sometimes requires a main title followed by a subtitle that elaborates on the main title, in which case the main title and subtitle are separated by a colon. Here are some titles from recent issues of professional journals published by the American Psychological Association.

• Sex Differences in Coping Styles and Implications for Depressed Mood
• Effects of Aging and Divided Attention on Memory for Items and Their Contexts
• Computer-Assisted Cognitive Behavioural Therapy for Child Anxiety: Results of a Randomized Clinical Trial
• Virtual Driving and Risk Taking: Do Racing Games Increase Risk-Taking Cognitions, Affect, and Behaviour?

Below the title are the authors’ names and, on the next line, their institutional affiliation—the university or other institution where the authors worked when they conducted the research. As we have already seen, the authors are listed in an order that reflects their contribution to the research. When multiple authors have made equal contributions to the research, they often list their names alphabetically or in a randomly determined order.

In some areas of psychology, the titles of many empirical research reports are informal in a way that is perhaps best described as “cute.” They usually take the form of a play on words or a well-known expression that relates to the topic under study. Here are some examples from recent issues of the Journal Psychological Science .

• “Smells Like Clean Spirit: Nonconscious Effects of Scent on Cognition and Behavior”
• “Time Crawls: The Temporal Resolution of Infants’ Visual Attention”
• “Scent of a Woman: Men’s Testosterone Responses to Olfactory Ovulation Cues”
• “Apocalypse Soon?: Dire Messages Reduce Belief in Global Warming by Contradicting Just-World Beliefs”
• “Serial vs. Parallel Processing: Sometimes They Look Like Tweedledum and Tweedledee but They Can (and Should) Be Distinguished”
• “How Do I Love Thee? Let Me Count the Words: The Social Effects of Expressive Writing”

Individual researchers differ quite a bit in their preference for such titles. Some use them regularly, while others never use them. What might be some of the pros and cons of using cute article titles?

For articles that are being submitted for publication, the title page also includes an author note that lists the authors’ full institutional affiliations, any acknowledgments the authors wish to make to agencies that funded the research or to colleagues who commented on it, and contact information for the authors. For student papers that are not being submitted for publication—including theses—author notes are generally not necessary.

The  abstract  is a summary of the study. It is the second page of the manuscript and is headed with the word  Abstract . The first line is not indented. The abstract presents the research question, a summary of the method, the basic results, and the most important conclusions. Because the abstract is usually limited to about 200 words, it can be a challenge to write a good one.

Introduction

The  introduction  begins on the third page of the manuscript. The heading at the top of this page is the full title of the manuscript, with each important word capitalized as on the title page. The introduction includes three distinct subsections, although these are typically not identified by separate headings. The opening introduces the research question and explains why it is interesting, the literature review discusses relevant previous research, and the closing restates the research question and comments on the method used to answer it.

The Opening

The  opening , which is usually a paragraph or two in length, introduces the research question and explains why it is interesting. To capture the reader’s attention, researcher Daryl Bem recommends starting with general observations about the topic under study, expressed in ordinary language (not technical jargon)—observations that are about people and their behaviour (not about researchers or their research; Bem, 2003 [1] ). Concrete examples are often very useful here. According to Bem, this would be a poor way to begin a research report:

Festinger’s theory of cognitive dissonance received a great deal of attention during the latter part of the 20th century (p. 191)

The following would be much better:

The individual who holds two beliefs that are inconsistent with one another may feel uncomfortable. For example, the person who knows that he or she enjoys smoking but believes it to be unhealthy may experience discomfort arising from the inconsistency or disharmony between these two thoughts or cognitions. This feeling of discomfort was called cognitive dissonance by social psychologist Leon Festinger (1957), who suggested that individuals will be motivated to remove this dissonance in whatever way they can (p. 191).

After capturing the reader’s attention, the opening should go on to introduce the research question and explain why it is interesting. Will the answer fill a gap in the literature? Will it provide a test of an important theory? Does it have practical implications? Giving readers a clear sense of what the research is about and why they should care about it will motivate them to continue reading the literature review—and will help them make sense of it.

Breaking the Rules

Researcher Larry Jacoby reported several studies showing that a word that people see or hear repeatedly can seem more familiar even when they do not recall the repetitions—and that this tendency is especially pronounced among older adults. He opened his article with the following humourous anecdote:

A friend whose mother is suffering symptoms of Alzheimer’s disease (AD) tells the story of taking her mother to visit a nursing home, preliminary to her mother’s moving there. During an orientation meeting at the nursing home, the rules and regulations were explained, one of which regarded the dining room. The dining room was described as similar to a fine restaurant except that tipping was not required. The absence of tipping was a central theme in the orientation lecture, mentioned frequently to emphasize the quality of care along with the advantages of having paid in advance. At the end of the meeting, the friend’s mother was asked whether she had any questions. She replied that she only had one question: “Should I tip?” (Jacoby, 1999, p. 3)

Although both humour and personal anecdotes are generally discouraged in APA-style writing, this example is a highly effective way to start because it both engages the reader and provides an excellent real-world example of the topic under study.

The Literature Review

Immediately after the opening comes the  literature review , which describes relevant previous research on the topic and can be anywhere from several paragraphs to several pages in length. However, the literature review is not simply a list of past studies. Instead, it constitutes a kind of argument for why the research question is worth addressing. By the end of the literature review, readers should be convinced that the research question makes sense and that the present study is a logical next step in the ongoing research process.

Like any effective argument, the literature review must have some kind of structure. For example, it might begin by describing a phenomenon in a general way along with several studies that demonstrate it, then describing two or more competing theories of the phenomenon, and finally presenting a hypothesis to test one or more of the theories. Or it might describe one phenomenon, then describe another phenomenon that seems inconsistent with the first one, then propose a theory that resolves the inconsistency, and finally present a hypothesis to test that theory. In applied research, it might describe a phenomenon or theory, then describe how that phenomenon or theory applies to some important real-world situation, and finally suggest a way to test whether it does, in fact, apply to that situation.

Looking at the literature review in this way emphasizes a few things. First, it is extremely important to start with an outline of the main points that you want to make, organized in the order that you want to make them. The basic structure of your argument, then, should be apparent from the outline itself. Second, it is important to emphasize the structure of your argument in your writing. One way to do this is to begin the literature review by summarizing your argument even before you begin to make it. “In this article, I will describe two apparently contradictory phenomena, present a new theory that has the potential to resolve the apparent contradiction, and finally present a novel hypothesis to test the theory.” Another way is to open each paragraph with a sentence that summarizes the main point of the paragraph and links it to the preceding points. These opening sentences provide the “transitions” that many beginning researchers have difficulty with. Instead of beginning a paragraph by launching into a description of a previous study, such as “Williams (2004) found that…,” it is better to start by indicating something about why you are describing this particular study. Here are some simple examples:

Another example of this phenomenon comes from the work of Williams (2004).

Williams (2004) offers one explanation of this phenomenon.

An alternative perspective has been provided by Williams (2004).

We used a method based on the one used by Williams (2004).

Finally, remember that your goal is to construct an argument for why your research question is interesting and worth addressing—not necessarily why your favourite answer to it is correct. In other words, your literature review must be balanced. If you want to emphasize the generality of a phenomenon, then of course you should discuss various studies that have demonstrated it. However, if there are other studies that have failed to demonstrate it, you should discuss them too. Or if you are proposing a new theory, then of course you should discuss findings that are consistent with that theory. However, if there are other findings that are inconsistent with it, again, you should discuss them too. It is acceptable to argue that the  balance  of the research supports the existence of a phenomenon or is consistent with a theory (and that is usually the best that researchers in psychology can hope for), but it is not acceptable to  ignore contradictory evidence. Besides, a large part of what makes a research question interesting is uncertainty about its answer.

The Closing

The  closing  of the introduction—typically the final paragraph or two—usually includes two important elements. The first is a clear statement of the main research question or hypothesis. This statement tends to be more formal and precise than in the opening and is often expressed in terms of operational definitions of the key variables. The second is a brief overview of the method and some comment on its appropriateness. Here, for example, is how Darley and Latané (1968) [2] concluded the introduction to their classic article on the bystander effect:

These considerations lead to the hypothesis that the more bystanders to an emergency, the less likely, or the more slowly, any one bystander will intervene to provide aid. To test this proposition it would be necessary to create a situation in which a realistic “emergency” could plausibly occur. Each subject should also be blocked from communicating with others to prevent his getting information about their behaviour during the emergency. Finally, the experimental situation should allow for the assessment of the speed and frequency of the subjects’ reaction to the emergency. The experiment reported below attempted to fulfill these conditions. (p. 378)

Thus the introduction leads smoothly into the next major section of the article—the method section.

The  method section  is where you describe how you conducted your study. An important principle for writing a method section is that it should be clear and detailed enough that other researchers could replicate the study by following your “recipe.” This means that it must describe all the important elements of the study—basic demographic characteristics of the participants, how they were recruited, whether they were randomly assigned, how the variables were manipulated or measured, how counterbalancing was accomplished, and so on. At the same time, it should avoid irrelevant details such as the fact that the study was conducted in Classroom 37B of the Industrial Technology Building or that the questionnaire was double-sided and completed using pencils.

The method section begins immediately after the introduction ends with the heading “Method” (not “Methods”) centred on the page. Immediately after this is the subheading “Participants,” left justified and in italics. The participants subsection indicates how many participants there were, the number of women and men, some indication of their age, other demographics that may be relevant to the study, and how they were recruited, including any incentives given for participation.

After the participants section, the structure can vary a bit. Figure 11.1 shows three common approaches. In the first, the participants section is followed by a design and procedure subsection, which describes the rest of the method. This works well for methods that are relatively simple and can be described adequately in a few paragraphs. In the second approach, the participants section is followed by separate design and procedure subsections. This works well when both the design and the procedure are relatively complicated and each requires multiple paragraphs.

What is the difference between design and procedure? The design of a study is its overall structure. What were the independent and dependent variables? Was the independent variable manipulated, and if so, was it manipulated between or within subjects? How were the variables operationally defined? The procedure is how the study was carried out. It often works well to describe the procedure in terms of what the participants did rather than what the researchers did. For example, the participants gave their informed consent, read a set of instructions, completed a block of four practice trials, completed a block of 20 test trials, completed two questionnaires, and were debriefed and excused.

In the third basic way to organize a method section, the participants subsection is followed by a materials subsection before the design and procedure subsections. This works well when there are complicated materials to describe. This might mean multiple questionnaires, written vignettes that participants read and respond to, perceptual stimuli, and so on. The heading of this subsection can be modified to reflect its content. Instead of “Materials,” it can be “Questionnaires,” “Stimuli,” and so on.

The  results section  is where you present the main results of the study, including the results of the statistical analyses. Although it does not include the raw data—individual participants’ responses or scores—researchers should save their raw data and make them available to other researchers who request them. Several journals now encourage the open sharing of raw data online.

Although there are no standard subsections, it is still important for the results section to be logically organized. Typically it begins with certain preliminary issues. One is whether any participants or responses were excluded from the analyses and why. The rationale for excluding data should be described clearly so that other researchers can decide whether it is appropriate. A second preliminary issue is how multiple responses were combined to produce the primary variables in the analyses. For example, if participants rated the attractiveness of 20 stimulus people, you might have to explain that you began by computing the mean attractiveness rating for each participant. Or if they recalled as many items as they could from study list of 20 words, did you count the number correctly recalled, compute the percentage correctly recalled, or perhaps compute the number correct minus the number incorrect? A third preliminary issue is the reliability of the measures. This is where you would present test-retest correlations, Cronbach’s α, or other statistics to show that the measures are consistent across time and across items. A final preliminary issue is whether the manipulation was successful. This is where you would report the results of any manipulation checks.

The results section should then tackle the primary research questions, one at a time. Again, there should be a clear organization. One approach would be to answer the most general questions and then proceed to answer more specific ones. Another would be to answer the main question first and then to answer secondary ones. Regardless, Bem (2003) [3] suggests the following basic structure for discussing each new result:

• Remind the reader of the research question.
• Give the answer to the research question in words.
• Present the relevant statistics.
• Qualify the answer if necessary.
• Summarize the result.

Notice that only Step 3 necessarily involves numbers. The rest of the steps involve presenting the research question and the answer to it in words. In fact, the basic results should be clear even to a reader who skips over the numbers.

The  discussion  is the last major section of the research report. Discussions usually consist of some combination of the following elements:

• Summary of the research
• Theoretical implications
• Practical implications
• Limitations
• Suggestions for future research

The discussion typically begins with a summary of the study that provides a clear answer to the research question. In a short report with a single study, this might require no more than a sentence. In a longer report with multiple studies, it might require a paragraph or even two. The summary is often followed by a discussion of the theoretical implications of the research. Do the results provide support for any existing theories? If not, how  can  they be explained? Although you do not have to provide a definitive explanation or detailed theory for your results, you at least need to outline one or more possible explanations. In applied research—and often in basic research—there is also some discussion of the practical implications of the research. How can the results be used, and by whom, to accomplish some real-world goal?

The theoretical and practical implications are often followed by a discussion of the study’s limitations. Perhaps there are problems with its internal or external validity. Perhaps the manipulation was not very effective or the measures not very reliable. Perhaps there is some evidence that participants did not fully understand their task or that they were suspicious of the intent of the researchers. Now is the time to discuss these issues and how they might have affected the results. But do not overdo it. All studies have limitations, and most readers will understand that a different sample or different measures might have produced different results. Unless there is good reason to think they  would have, however, there is no reason to mention these routine issues. Instead, pick two or three limitations that seem like they could have influenced the results, explain how they could have influenced the results, and suggest ways to deal with them.

Most discussions end with some suggestions for future research. If the study did not satisfactorily answer the original research question, what will it take to do so? What  new  research questions has the study raised? This part of the discussion, however, is not just a list of new questions. It is a discussion of two or three of the most important unresolved issues. This means identifying and clarifying each question, suggesting some alternative answers, and even suggesting ways they could be studied.

Finally, some researchers are quite good at ending their articles with a sweeping or thought-provoking conclusion. Darley and Latané (1968) [4] , for example, ended their article on the bystander effect by discussing the idea that whether people help others may depend more on the situation than on their personalities. Their final sentence is, “If people understand the situational forces that can make them hesitate to intervene, they may better overcome them” (p. 383). However, this kind of ending can be difficult to pull off. It can sound overreaching or just banal and end up detracting from the overall impact of the article. It is often better simply to end when you have made your final point (although you should avoid ending on a limitation).

The references section begins on a new page with the heading “References” centred at the top of the page. All references cited in the text are then listed in the format presented earlier. They are listed alphabetically by the last name of the first author. If two sources have the same first author, they are listed alphabetically by the last name of the second author. If all the authors are the same, then they are listed chronologically by the year of publication. Everything in the reference list is double-spaced both within and between references.

Appendices, Tables, and Figures

Appendices, tables, and figures come after the references. An  appendix  is appropriate for supplemental material that would interrupt the flow of the research report if it were presented within any of the major sections. An appendix could be used to present lists of stimulus words, questionnaire items, detailed descriptions of special equipment or unusual statistical analyses, or references to the studies that are included in a meta-analysis. Each appendix begins on a new page. If there is only one, the heading is “Appendix,” centred at the top of the page. If there is more than one, the headings are “Appendix A,” “Appendix B,” and so on, and they appear in the order they were first mentioned in the text of the report.

After any appendices come tables and then figures. Tables and figures are both used to present results. Figures can also be used to illustrate theories (e.g., in the form of a flowchart), display stimuli, outline procedures, and present many other kinds of information. Each table and figure appears on its own page. Tables are numbered in the order that they are first mentioned in the text (“Table 1,” “Table 2,” and so on). Figures are numbered the same way (“Figure 1,” “Figure 2,” and so on). A brief explanatory title, with the important words capitalized, appears above each table. Each figure is given a brief explanatory caption, where (aside from proper nouns or names) only the first word of each sentence is capitalized. More details on preparing APA-style tables and figures are presented later in the book.

Sample APA-Style Research Report

Figures 11.2, 11.3, 11.4, and 11.5 show some sample pages from an APA-style empirical research report originally written by undergraduate student Tomoe Suyama at California State University, Fresno. The main purpose of these figures is to illustrate the basic organization and formatting of an APA-style empirical research report, although many high-level and low-level style conventions can be seen here too.

Key Takeaways

• An APA-style empirical research report consists of several standard sections. The main ones are the abstract, introduction, method, results, discussion, and references.
• The introduction consists of an opening that presents the research question, a literature review that describes previous research on the topic, and a closing that restates the research question and comments on the method. The literature review constitutes an argument for why the current study is worth doing.
• The method section describes the method in enough detail that another researcher could replicate the study. At a minimum, it consists of a participants subsection and a design and procedure subsection.
• The results section describes the results in an organized fashion. Each primary result is presented in terms of statistical results but also explained in words.
• The discussion typically summarizes the study, discusses theoretical and practical implications and limitations of the study, and offers suggestions for further research.
• Practice: Look through an issue of a general interest professional journal (e.g.,  Psychological Science ). Read the opening of the first five articles and rate the effectiveness of each one from 1 ( very ineffective ) to 5 ( very effective ). Write a sentence or two explaining each rating.
• Practice: Find a recent article in a professional journal and identify where the opening, literature review, and closing of the introduction begin and end.
• Practice: Find a recent article in a professional journal and highlight in a different colour each of the following elements in the discussion: summary, theoretical implications, practical implications, limitations, and suggestions for future research.

Long Descriptions

Figure 11.1 long description: Table showing three ways of organizing an APA-style method section.

In the simple method, there are two subheadings: “Participants” (which might begin “The participants were…”) and “Design and procedure” (which might begin “There were three conditions…”).

In the typical method, there are three subheadings: “Participants” (“The participants were…”), “Design” (“There were three conditions…”), and “Procedure” (“Participants viewed each stimulus on the computer screen…”).

In the complex method, there are four subheadings: “Participants” (“The participants were…”), “Materials” (“The stimuli were…”), “Design” (“There were three conditions…”), and “Procedure” (“Participants viewed each stimulus on the computer screen…”). [Return to Figure 11.1]

• Bem, D. J. (2003). Writing the empirical journal article. In J. M. Darley, M. P. Zanna, & H. R. Roediger III (Eds.),  The compleat academic: A practical guide for the beginning social scientist  (2nd ed.). Washington, DC: American Psychological Association. ↵
• Darley, J. M., & Latané, B. (1968). Bystander intervention in emergencies: Diffusion of responsibility.  Journal of Personality and Social Psychology, 4 , 377–383. ↵

A type of research article which describes one or more new empirical studies conducted by the authors.

The page at the beginning of an APA-style research report containing the title of the article, the authors’ names, and their institutional affiliation.

A summary of a research study.

The third page of a manuscript containing the research question, the literature review, and comments about how to answer the research question.

An introduction to the research question and explanation for why this question is interesting.

A description of relevant previous research on the topic being discusses and an argument for why the research is worth addressing.

The end of the introduction, where the research question is reiterated and the method is commented upon.

The section of a research report where the method used to conduct the study is described.

The main results of the study, including the results from statistical analyses, are presented in a research article.

Section of a research report that summarizes the study's results and interprets them by referring back to the study's theoretical background.

Part of a research report which contains supplemental material.

Research Methods in Psychology - 2nd Canadian Edition Copyright © 2015 by Paul C. Price, Rajiv Jhangiani, & I-Chant A. Chiang is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

Share This Book

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Sweepstakes
• Guided Meditations
• Verywell Mind Insights
• 2024 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

A Table of Contents in APA Format

General guidelines.

• Table of Contents

APA style does not require a table of contents, but there are cases where you may need to include one. For example, your instructor may specify that your paper must be submitted with a table of contents. A table of contents can be particularly helpful in cases where your paper is lengthy or covers a lot of material, such as a thesis paper or dissertation. Research papers, in particular, may benefit from the addition of a table of contents.

APA style is the official publication style of the American Psychological Association. APA style is used in psychology courses as well as other social science classes including those in social science, behavioral sciences, and education.

The table of contents serves as a basic roadmap of your paper. It should list all of the major headings and subheadings within the body of your paper. For a standard psychology paper, it might include listings for the introduction, method, results, and discussion sections of your paper.

While the APA may not specify guidelines for a table of contents, you should use the basic APA format for formatting your table of contents:

• Use one-inch margins on all sides
• Use 12-point Times New Roman font
• Double-space

Since APA does not require a table of contents, you should always refer to your instructor’s guidelines when deciding whether or not to include one.

It is also important to note that the 7th edition of the Publication Manual of the American Psychological Association was published in 2020, and included updated guidelines on many topics.

For example, while the previous edition of the style manual required a running head on each page of a paper, the 7th edition has eliminated that requirement on student papers unless your instructor specifies to include it. Always ask first.

If you are using a standard APA paper format, your table of contents should include the following sections:

• Introduction

The above format may work well for a standard lab report or research paper. However, your table of contents will look much different if you are writing something such as a critique, essay, or case study.

Notice, that the table of contents does not include the abstract or acknowledgments pages. When applicable, it should list the appendices and the lists of tables and figures.

The exact order of your paper depends largely on the type of paper you are writing. In general, your paper should be presented in the following order:

• Main Body of Paper

Table of Contents Format

Because there is no standard format for a table of contents in APA style, you should always defer to the provided guidelines for your assignment.

If your instructor does not have a preferred format, consider using the following:

• Title the page “Table of Contents” and center the title at the top of the page.
• Most papers should include at least two levels of headings, up to five levels.
• Level one headings will be for main topics, such as chapter titles like "Chapter One; Name of Chapter," or research sections like "Method," "Results," and "Discussion."
• All level-one headings should be flush-left and sub-headings should be indented five spaces deeper than the last. 
• All heading levels should be in title case, capitalizing the first letter of each word. The font type, style, and size stay the same for each level.
• The page number for each heading is formatted flush-right. Include dot leaders between the headings and the page number to improve readability.

While you might not think that following APA format is important, it is one of those areas where students can lose points for making small errors. It pays to spend a little extra time and attention making sure that your paper is formatted in proper APA style.

• If you need help, you can get assistance from your school's writing lab.
• Getting your own copy of the latest edition of the APA publication manual can be very helpful.
• Always refer to any instructions or guidelines that were provided by your course instructor.
• There is a helpful feature in most word processors that you can use to pre-format your paper in APA style. It takes a little effort to set it up, but well worth it in the end, especially for longer documents. You can save the style to apply to your future papers saving you the effort next time.

For those writing a paper to submit for publication, check with the publisher for any specific formatting requirements that they may have.

American Psychological Association. Publication Manual of the American Psychological Association (7th ed.) ; 2020.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

• Privacy Policy

Home » Research Report – Example, Writing Guide and Types

Research Report – Example, Writing Guide and Types

Table of Contents

Research Report

Definition:

Research Report is a written document that presents the results of a research project or study, including the research question, methodology, results, and conclusions, in a clear and objective manner.

The purpose of a research report is to communicate the findings of the research to the intended audience, which could be other researchers, stakeholders, or the general public.

Components of Research Report

Components of Research Report are as follows:

Introduction

The introduction sets the stage for the research report and provides a brief overview of the research question or problem being investigated. It should include a clear statement of the purpose of the study and its significance or relevance to the field of research. It may also provide background information or a literature review to help contextualize the research.

Literature Review

The literature review provides a critical analysis and synthesis of the existing research and scholarship relevant to the research question or problem. It should identify the gaps, inconsistencies, and contradictions in the literature and show how the current study addresses these issues. The literature review also establishes the theoretical framework or conceptual model that guides the research.

Methodology

The methodology section describes the research design, methods, and procedures used to collect and analyze data. It should include information on the sample or participants, data collection instruments, data collection procedures, and data analysis techniques. The methodology should be clear and detailed enough to allow other researchers to replicate the study.

The results section presents the findings of the study in a clear and objective manner. It should provide a detailed description of the data and statistics used to answer the research question or test the hypothesis. Tables, graphs, and figures may be included to help visualize the data and illustrate the key findings.

The discussion section interprets the results of the study and explains their significance or relevance to the research question or problem. It should also compare the current findings with those of previous studies and identify the implications for future research or practice. The discussion should be based on the results presented in the previous section and should avoid speculation or unfounded conclusions.

The conclusion summarizes the key findings of the study and restates the main argument or thesis presented in the introduction. It should also provide a brief overview of the contributions of the study to the field of research and the implications for practice or policy.

The references section lists all the sources cited in the research report, following a specific citation style, such as APA or MLA.

The appendices section includes any additional material, such as data tables, figures, or instruments used in the study, that could not be included in the main text due to space limitations.

Types of Research Report

Types of Research Report are as follows:

Thesis is a type of research report. A thesis is a long-form research document that presents the findings and conclusions of an original research study conducted by a student as part of a graduate or postgraduate program. It is typically written by a student pursuing a higher degree, such as a Master’s or Doctoral degree, although it can also be written by researchers or scholars in other fields.

Research Paper

Research paper is a type of research report. A research paper is a document that presents the results of a research study or investigation. Research papers can be written in a variety of fields, including science, social science, humanities, and business. They typically follow a standard format that includes an introduction, literature review, methodology, results, discussion, and conclusion sections.

Technical Report

A technical report is a detailed report that provides information about a specific technical or scientific problem or project. Technical reports are often used in engineering, science, and other technical fields to document research and development work.

Progress Report

A progress report provides an update on the progress of a research project or program over a specific period of time. Progress reports are typically used to communicate the status of a project to stakeholders, funders, or project managers.

Feasibility Report

A feasibility report assesses the feasibility of a proposed project or plan, providing an analysis of the potential risks, benefits, and costs associated with the project. Feasibility reports are often used in business, engineering, and other fields to determine the viability of a project before it is undertaken.

Field Report

A field report documents observations and findings from fieldwork, which is research conducted in the natural environment or setting. Field reports are often used in anthropology, ecology, and other social and natural sciences.

Experimental Report

An experimental report documents the results of a scientific experiment, including the hypothesis, methods, results, and conclusions. Experimental reports are often used in biology, chemistry, and other sciences to communicate the results of laboratory experiments.

Case Study Report

A case study report provides an in-depth analysis of a specific case or situation, often used in psychology, social work, and other fields to document and understand complex cases or phenomena.

Literature Review Report

A literature review report synthesizes and summarizes existing research on a specific topic, providing an overview of the current state of knowledge on the subject. Literature review reports are often used in social sciences, education, and other fields to identify gaps in the literature and guide future research.

Research Report Example

Following is a Research Report Example sample for Students:

Title: The Impact of Social Media on Academic Performance among High School Students

This study aims to investigate the relationship between social media use and academic performance among high school students. The study utilized a quantitative research design, which involved a survey questionnaire administered to a sample of 200 high school students. The findings indicate that there is a negative correlation between social media use and academic performance, suggesting that excessive social media use can lead to poor academic performance among high school students. The results of this study have important implications for educators, parents, and policymakers, as they highlight the need for strategies that can help students balance their social media use and academic responsibilities.

Introduction:

Social media has become an integral part of the lives of high school students. With the widespread use of social media platforms such as Facebook, Twitter, Instagram, and Snapchat, students can connect with friends, share photos and videos, and engage in discussions on a range of topics. While social media offers many benefits, concerns have been raised about its impact on academic performance. Many studies have found a negative correlation between social media use and academic performance among high school students (Kirschner & Karpinski, 2010; Paul, Baker, & Cochran, 2012).

Given the growing importance of social media in the lives of high school students, it is important to investigate its impact on academic performance. This study aims to address this gap by examining the relationship between social media use and academic performance among high school students.

Methodology:

The study utilized a quantitative research design, which involved a survey questionnaire administered to a sample of 200 high school students. The questionnaire was developed based on previous studies and was designed to measure the frequency and duration of social media use, as well as academic performance.

The participants were selected using a convenience sampling technique, and the survey questionnaire was distributed in the classroom during regular school hours. The data collected were analyzed using descriptive statistics and correlation analysis.

The findings indicate that the majority of high school students use social media platforms on a daily basis, with Facebook being the most popular platform. The results also show a negative correlation between social media use and academic performance, suggesting that excessive social media use can lead to poor academic performance among high school students.

Discussion:

The results of this study have important implications for educators, parents, and policymakers. The negative correlation between social media use and academic performance suggests that strategies should be put in place to help students balance their social media use and academic responsibilities. For example, educators could incorporate social media into their teaching strategies to engage students and enhance learning. Parents could limit their children’s social media use and encourage them to prioritize their academic responsibilities. Policymakers could develop guidelines and policies to regulate social media use among high school students.

Conclusion:

In conclusion, this study provides evidence of the negative impact of social media on academic performance among high school students. The findings highlight the need for strategies that can help students balance their social media use and academic responsibilities. Further research is needed to explore the specific mechanisms by which social media use affects academic performance and to develop effective strategies for addressing this issue.

Limitations:

One limitation of this study is the use of convenience sampling, which limits the generalizability of the findings to other populations. Future studies should use random sampling techniques to increase the representativeness of the sample. Another limitation is the use of self-reported measures, which may be subject to social desirability bias. Future studies could use objective measures of social media use and academic performance, such as tracking software and school records.

Implications:

The findings of this study have important implications for educators, parents, and policymakers. Educators could incorporate social media into their teaching strategies to engage students and enhance learning. For example, teachers could use social media platforms to share relevant educational resources and facilitate online discussions. Parents could limit their children’s social media use and encourage them to prioritize their academic responsibilities. They could also engage in open communication with their children to understand their social media use and its impact on their academic performance. Policymakers could develop guidelines and policies to regulate social media use among high school students. For example, schools could implement social media policies that restrict access during class time and encourage responsible use.

References:

• Kirschner, P. A., & Karpinski, A. C. (2010). Facebook® and academic performance. Computers in Human Behavior, 26(6), 1237-1245.
• Paul, J. A., Baker, H. M., & Cochran, J. D. (2012). Effect of online social networking on student academic performance. Journal of the Research Center for Educational Technology, 8(1), 1-19.
• Pantic, I. (2014). Online social networking and mental health. Cyberpsychology, Behavior, and Social Networking, 17(10), 652-657.
• Rosen, L. D., Carrier, L. M., & Cheever, N. A. (2013). Facebook and texting made me do it: Media-induced task-switching while studying. Computers in Human Behavior, 29(3), 948-958.

Note*: Above mention, Example is just a sample for the students’ guide. Do not directly copy and paste as your College or University assignment. Kindly do some research and Write your own.

Applications of Research Report

Research reports have many applications, including:

• Communicating research findings: The primary application of a research report is to communicate the results of a study to other researchers, stakeholders, or the general public. The report serves as a way to share new knowledge, insights, and discoveries with others in the field.
• Informing policy and practice : Research reports can inform policy and practice by providing evidence-based recommendations for decision-makers. For example, a research report on the effectiveness of a new drug could inform regulatory agencies in their decision-making process.
• Supporting further research: Research reports can provide a foundation for further research in a particular area. Other researchers may use the findings and methodology of a report to develop new research questions or to build on existing research.
• Evaluating programs and interventions : Research reports can be used to evaluate the effectiveness of programs and interventions in achieving their intended outcomes. For example, a research report on a new educational program could provide evidence of its impact on student performance.
• Demonstrating impact : Research reports can be used to demonstrate the impact of research funding or to evaluate the success of research projects. By presenting the findings and outcomes of a study, research reports can show the value of research to funders and stakeholders.
• Enhancing professional development : Research reports can be used to enhance professional development by providing a source of information and learning for researchers and practitioners in a particular field. For example, a research report on a new teaching methodology could provide insights and ideas for educators to incorporate into their own practice.

How to write Research Report

Here are some steps you can follow to write a research report:

• Identify the research question: The first step in writing a research report is to identify your research question. This will help you focus your research and organize your findings.
• Conduct research : Once you have identified your research question, you will need to conduct research to gather relevant data and information. This can involve conducting experiments, reviewing literature, or analyzing data.
• Organize your findings: Once you have gathered all of your data, you will need to organize your findings in a way that is clear and understandable. This can involve creating tables, graphs, or charts to illustrate your results.
• Write the report: Once you have organized your findings, you can begin writing the report. Start with an introduction that provides background information and explains the purpose of your research. Next, provide a detailed description of your research methods and findings. Finally, summarize your results and draw conclusions based on your findings.
• Proofread and edit: After you have written your report, be sure to proofread and edit it carefully. Check for grammar and spelling errors, and make sure that your report is well-organized and easy to read.
• Include a reference list: Be sure to include a list of references that you used in your research. This will give credit to your sources and allow readers to further explore the topic if they choose.
• Format your report: Finally, format your report according to the guidelines provided by your instructor or organization. This may include formatting requirements for headings, margins, fonts, and spacing.

Purpose of Research Report

The purpose of a research report is to communicate the results of a research study to a specific audience, such as peers in the same field, stakeholders, or the general public. The report provides a detailed description of the research methods, findings, and conclusions.

Some common purposes of a research report include:

• Sharing knowledge: A research report allows researchers to share their findings and knowledge with others in their field. This helps to advance the field and improve the understanding of a particular topic.
• Identifying trends: A research report can identify trends and patterns in data, which can help guide future research and inform decision-making.
• Addressing problems: A research report can provide insights into problems or issues and suggest solutions or recommendations for addressing them.
• Evaluating programs or interventions : A research report can evaluate the effectiveness of programs or interventions, which can inform decision-making about whether to continue, modify, or discontinue them.
• Meeting regulatory requirements: In some fields, research reports are required to meet regulatory requirements, such as in the case of drug trials or environmental impact studies.

When to Write Research Report

A research report should be written after completing the research study. This includes collecting data, analyzing the results, and drawing conclusions based on the findings. Once the research is complete, the report should be written in a timely manner while the information is still fresh in the researcher’s mind.

In academic settings, research reports are often required as part of coursework or as part of a thesis or dissertation. In this case, the report should be written according to the guidelines provided by the instructor or institution.

In other settings, such as in industry or government, research reports may be required to inform decision-making or to comply with regulatory requirements. In these cases, the report should be written as soon as possible after the research is completed in order to inform decision-making in a timely manner.

Overall, the timing of when to write a research report depends on the purpose of the research, the expectations of the audience, and any regulatory requirements that need to be met. However, it is important to complete the report in a timely manner while the information is still fresh in the researcher’s mind.

Characteristics of Research Report

There are several characteristics of a research report that distinguish it from other types of writing. These characteristics include:

• Objective: A research report should be written in an objective and unbiased manner. It should present the facts and findings of the research study without any personal opinions or biases.
• Systematic: A research report should be written in a systematic manner. It should follow a clear and logical structure, and the information should be presented in a way that is easy to understand and follow.
• Detailed: A research report should be detailed and comprehensive. It should provide a thorough description of the research methods, results, and conclusions.
• Accurate : A research report should be accurate and based on sound research methods. The findings and conclusions should be supported by data and evidence.
• Organized: A research report should be well-organized. It should include headings and subheadings to help the reader navigate the report and understand the main points.
• Clear and concise: A research report should be written in clear and concise language. The information should be presented in a way that is easy to understand, and unnecessary jargon should be avoided.
• Citations and references: A research report should include citations and references to support the findings and conclusions. This helps to give credit to other researchers and to provide readers with the opportunity to further explore the topic.

Advantages of Research Report

Research reports have several advantages, including:

• Communicating research findings: Research reports allow researchers to communicate their findings to a wider audience, including other researchers, stakeholders, and the general public. This helps to disseminate knowledge and advance the understanding of a particular topic.
• Providing evidence for decision-making : Research reports can provide evidence to inform decision-making, such as in the case of policy-making, program planning, or product development. The findings and conclusions can help guide decisions and improve outcomes.
• Supporting further research: Research reports can provide a foundation for further research on a particular topic. Other researchers can build on the findings and conclusions of the report, which can lead to further discoveries and advancements in the field.
• Demonstrating expertise: Research reports can demonstrate the expertise of the researchers and their ability to conduct rigorous and high-quality research. This can be important for securing funding, promotions, and other professional opportunities.
• Meeting regulatory requirements: In some fields, research reports are required to meet regulatory requirements, such as in the case of drug trials or environmental impact studies. Producing a high-quality research report can help ensure compliance with these requirements.

Limitations of Research Report

Despite their advantages, research reports also have some limitations, including:

• Time-consuming: Conducting research and writing a report can be a time-consuming process, particularly for large-scale studies. This can limit the frequency and speed of producing research reports.
• Expensive: Conducting research and producing a report can be expensive, particularly for studies that require specialized equipment, personnel, or data. This can limit the scope and feasibility of some research studies.
• Limited generalizability: Research studies often focus on a specific population or context, which can limit the generalizability of the findings to other populations or contexts.
• Potential bias : Researchers may have biases or conflicts of interest that can influence the findings and conclusions of the research study. Additionally, participants may also have biases or may not be representative of the larger population, which can limit the validity and reliability of the findings.
• Accessibility: Research reports may be written in technical or academic language, which can limit their accessibility to a wider audience. Additionally, some research may be behind paywalls or require specialized access, which can limit the ability of others to read and use the findings.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Data Collection – Methods Types and Examples

APA Table of Contents – Format and Example

Research Methods – Types, Examples and Guide

Dissertation vs Thesis – Key Differences

Conceptual Framework – Types, Methodology and...

Research Paper Conclusion – Writing Guide and...

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

6.4: Formal Report—Table of Contents and List of Figures

Learning objectives.

• Identify the role and format of a table of contents and list of figures

What Is a Table of Contents?

The table of contents shows readers what topics are covered in the report, how those topics are discussed (the subtopics), and on which page numbers those sections and subsections start.

In creating a  table of contents, you have a number of design decisions:

• Levels of headings to include: In longer reports, consider including only the top two levels of headings. This keeps the table of contents from becoming long and unwieldy. The table of contents should provide an at-a-glance way of finding information in the report quickly.
• Indentation, spacing, and capitalization: Notice in the illustration below that items in each of the levels of headings are aligned with each other. Although you can’t see it in the illustration, page numbers are right-aligned with each other.
• Vertical spacing: Notice that the first-level sections have extra space above and below, which increases readability.

Using the automatic table of contents creator in Word can help you produce a clean, professional document. Make sure the words in the table of contents are the same as they are in the text. As you write and revise, you might change some of the headings—don’t forget to change the table of contents accordingly.

Example: Table of Contents

What Is a List of Figures?

If your document has more than two figures or tables, create a separate list of figures. The list of figures has many of the same design considerations as the table of contents. Readers use the list of figures to quickly find the illustrations, diagrams, tables, and charts in your report.

Complications arise when you have both tables and figures. Strictly speaking, figures are illustrations, drawings, photographs, graphs, and charts. Tables are rows and columns of words and numbers; they are not considered figures.

For longer reports that contain dozens of figures and tables each, create separate lists of figures and tables. Put them together on the same page if they fit, as shown in the illustration below. You can combine the two lists under the heading, “List of Figures and Tables,” and identify the items as figure or table as is done in the illustration below.

Example: List of Figures

References & Attributions

Attributions

Content is adapted from  Technical Writing  by Allison Gross, Annemarie Hamlin, Billy Merck, Chris Rubio, Jodi Naas, Megan Savage, and Michele DeSilva, which is is licensed under a  Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

Original content for this page was derived by Annemarie Hamlin, Chris Rubio, and Michele DeSilva, Central Oregon Community College from  Online Technical Writing  by David McMurrey –  CC: BY 4.0

Writing in a Technical Environment (First Edition) Copyright © 2022 by Centennial College is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

Share This Book

• University of Michigan Library
• Research Guides

Microsoft Word for Dissertations

• Table of Contents
• Introduction, Template, & Resources
• Formatting for All Readers
• Applying a Style
• Modifying a Style
• Setting up a Heading 1 Example
• Images, Charts, Other Objects
• Footnotes, Endnotes, & Citations
• Cross-References
• Appendix Figures & Tables
• List of Figures/Tables
• Chapter and Section Numbering
• Page Numbers
• Landscape Pages
• Combining Chapter Files
• Commenting and Reviewing
• Tips & Tricks
• The Two-inch Top Margin
• Troubleshooting
• Finalizing Without Styles
• Preparing Your Final Document
• Take a break

Automatic Table of Contents

An automatic Table of Contents relies on Styles to keep track of page numbers and section titles for you automatically. Microsoft Word can scan your document and find everything in the Heading 1 style and put that on the first level of your table of contents, put any Heading 2’s on the second level of your table of contents, and so on.

If you want an automatic table of contents you need to apply the Heading 1 style to all of your chapter titles and front matter headings (like “Dedication” and “Acknowledgements”).  All section headings within your chapters should use the Heading 2  style.  All sub-section headings should use  Heading 3 , etc....

If you have used Heading styles in your document, creating an automatic table of contents is easy.

• Place your cursor where you want your table of contents to be.
• On the References Ribbon, in the Table of Contents Group , click on the arrow next to the Table of Contents icon, and select  Custom Table of Contents .
• We suggest that you set each level (Chapters, sections, sub-sections, aka TOC 1, TOC 2, TOC 3) to be single-spaced, with 12 points of space afterwards.  This makes each item in your ToC clump together if they're long enough to wrap to a second line, with the equivalent of a double space between each item, and makes the ToC easier to read and understand than if every line were double-spaced. See the video below for details.
• If you want to change which headings appear in your Table of Contents, you can do so by changing the number in the Show levels: field. Select "1" to just include the major sections (Acknowledgements, List of Figures, Chapters, etc...).  Select "4" to include Chapters, sections, sub-sections, and sub-sub-sections.
• Click OK to insert your table of contents.  

The table of contents is a snapshot of the headings and page numbers in your document, and does not automatically update itself as you make changes. At any time, you can update it by right-clicking on it and selecting Update field .  Notice that once the table of contents is in your document, it will turn gray if you click on it. This just reminds you that it is a special field managed by Word, and is getting information from somewhere else.

Modifying the format of your Table of Contents

The video below shows how to make your Table of Contents a little easier to read by formatting the spacing between items in your Table of Contents. You may recognize the "Modify Style" window that appears, which can serve as a reminder that you can use this window to modify more than just paragraph settings in the ToC. You can modify the indent distance, or font, or tab settings for your ToC, just the same as you may have modified it for Styles. 

By default, the Table of Contents tool creates the ToC by pulling in Headings 1 through 3. If you'd like to modify that -- to only show H1's, or to show Headings 1 through 4 -- then go to the References tab and select Custom Table of Contents .  In the window that appears, set Show Levels to "1" to only show Heading 1's in the Table of Contents, or set it to "4" to show Headings 1 through 4.

Bonus tip for updating fields like the Table of Contents

You'll quickly realize that all of the automatic Lists and Tables need to be updated occasionally to reflect any changes you've made elsewhere in the document -- they do not dynamically update by themselves. Normally, this means going to each field, right-clicking on it and selecting "Update Field". 

Alternatively, to update all fields throughout your document (Figure/Table numbers & Lists, cross-references, Table of Contents, etc...), just select "Print". This will usually cause Word to update everything in anticipation of printing. Once the print preview window appears, just cancel and double-check that it updated things.

• Formatting Guides

APA Table of Contents Writing Guide (+ example)

• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips
• Basics of Dissertation & Thesis Writing

• Essay Guides
• Research Paper Guides
• Basics of Research Process
• Admission Guides
• Dissertation & Thesis Guides

Table of contents

Use our free Readability checker

Today we are going to learn how to make a proper APA table of contents. However, let’s start with some backstory to understand the formatting standards according to the latest  APA 7th edition .

In an  APA style paper , a table of contents is commonly used in longer research papers or dissertations to provide an organized outline of the document's structure. It helps to increase readability and navigation greatly. Even though a table of contents is not officially required by the APA guide, you may be asked by the instructor to include one. That’s why we compiled this guide on how to format a table of contents in APA style. Read our detailed instructions to arrange a contents page. Or you can always ask StudyCrumb to " write my paper for me " and get comprehensive help with your work, including assistance with formatting.

Table of Contents APA: Basics

In the present APA table of contents guide, we will show the most convenient and recommendable format for an APA paper. The first thing that you need to remember — it can not exceed two pages in size. So if the table is a must according to the instructor, you may have to exclude some section headings to fit in. It is good to optimize your paper with subheadings, but don’t get obsessed with it. Here are some of the major formatting rules according to APA Style:  

• Include at least 2 levels of headings — level 1 and level 2.
• Use up to 5 levels of headings if it fits the structure.
• Apply indents to highlight different levels of headings.
• Locate it right after the abstract, before the intro part. (Read more information if you still wonder on how to write an abstract APA .)
• Use a 12 pt Times New Roman font.
• Keep the headings in the table left-aligned.
• Capitalize all the headlines.
• Make sure that margins from all sides are 1 inch long.

In all other regards, your formatting sticks to the plain text format. Don’t include any unnecessary formatting or highlighting. And don't be afraid to ask your instructor about it if you have any doubts or questions. At any time, you can  buy essay  quickly, remember about it.

APA Table of Contents Example

Nevertheless, there is nothing more representative than a proper APA table of contents sample. Pay attention to the length of indents for different heading levels. Check out our sample right below.

Note, there is no fixed standard for the length of indents that you make to highlight every level of headlines. Make sure that your headlines look readable and easy to distinguish.

Looking for annotated bibliography example APA ? We have got you covered! Open one more of our blogs.

How to Make APA Table of Contents in Word

Microsoft Word is the most likely software for formatting APA style tables of content. That’s why right now, we will learn how to generate automated ones. It is a very simple operation, and you only have to remember easy 3 steps:

• Format the headings first
• Apply an APA style format
• Keep your table updated.

And now, look closer at each individual step, so it will be much easier to remember. So, let’s go! Buy APA format paper entirely from scratch if you have troubles at this point.

Format Your Headings

Before starting working with headings, make sure that all of them are in line with the general formatting style. Normally, the table of contents is generated after the text is finished and proofread. So don’t be in a hurry, even though the contents are located in the very beginning of the text. Make sure that your piece is flawless and doesn’t contain misspellings. Try an  online typing test  to hone your typing skills quickly. Formatting headings is easy — just highlight the heading first. Then, find a top panel featuring heading styles and make a right click on the one you want to choose. After it, select Please update Heading X to match selection. Do it with every heading that you have. Assign each one with Heading 1 — Heading 5 roles.  

Create Table of Contents in APA Formats

One more step and our APA paper with table of contents is as good as ready. From the very beginning, type the page name, keep it centered and aligned to the top. Remember about 1-inch long indents. Make the heading bold to increase readability and navigation. Then choose the “ Table of Contents ” option from the “References” menu that is located on the top panel. In the new window, choose the number of heading levels that will be displayed. As you remember, you need at least 2 and not more than 5 levels of headings.  

Keep Table of Contents Consistent

From this point, all the highlighted headings will be automatically synchronized with your table of contents. In case if you make changes to the actual heading, you may also change it in your list in one click. Just make a right click on it and choose the “Update Field” option. In Microsoft Word, you can choose to update either one element or all elements at a time. We recommend updating all the elements to keep your paper consistent and good-looking. Hiring a bibliography writer to work on your table of contents might be helpful as well.

We hope our blog explained all those formatting tricks in a most understandable way. Check out other articles if you have any other questions about academic writing. Good luck with your writing!

Whether it is an APA-style paper or an opinion essay, be sure it will be delivered timely and composed with skill and diligence. Check out the writing service and give yourself a little break from writing! Contact us when you are ready. 

Frequently Asked Questions

1. is there a size limit for a table of contents in apa style.

Yes, your table of contents should not be bigger than two pages long. If it is larger, consider deleting it entirely or some of the headlines to fit in.

2. Where in the text is the table of contents located in APA style paper?

The table of contents is located after the Acknowledgment but before the Introduction paragraph.

3. How many heading levels is it required to have in a table of contents?

You need to include at least 2 levels and not more than 5 levels of headings. Just analyze the text and come up with the right format for your paper.

Emma Flores knows all about formatting standards. She shares with StudyCrumb readers tips on creating academic papers that will meet high-quality standards.

You may also like

• Discoveries
• Right Journal
• Journal Metrics
• Journal Fit
• Abbreviation
• In-Text Citations
• Bibliographies
• Writing an Article
• Peer Review Types
• Acknowledgements
• Withdrawing a Paper
• Form Letter
• ISO, ANSI, CFR
• Google Scholar
• Journal Manuscript Editing
• Research Manuscript Editing

Book Editing

• Manuscript Editing Services

Medical Editing

• Bioscience Editing
• Physical Science Editing
• PhD Thesis Editing Services
• PhD Editing
• Master’s Proofreading
• Bachelor’s Editing
• Dissertation Proofreading Services
• Best Dissertation Proofreaders
• Masters Dissertation Proofreading
• PhD Proofreaders
• Proofreading PhD Thesis Price
• Journal Article Editing
• Book Editing Service
• Editing and Proofreading Services
• Research Paper Editing
• Medical Manuscript Editing
• Academic Editing
• Social Sciences Editing
• Academic Proofreading
• PhD Theses Editing
• Dissertation Proofreading
• Proofreading Rates UK
• Medical Proofreading
• PhD Proofreading Services UK
• Academic Proofreading Services UK

Medical Editing Services

• Life Science Editing
• Biomedical Editing
• Environmental Science Editing
• Pharmaceutical Science Editing
• Economics Editing
• Psychology Editing
• Sociology Editing
• Archaeology Editing
• History Paper Editing
• Anthropology Editing
• Law Paper Editing
• Engineering Paper Editing
• Technical Paper Editing
• Philosophy Editing
• PhD Dissertation Proofreading
• Lektorat Englisch
• Akademisches Lektorat
• Lektorat Englisch Preise
• Wissenschaftliches Lektorat
• Lektorat Doktorarbeit

PhD Thesis Editing

• Thesis Proofreading Services
• PhD Thesis Proofreading
• Proofreading Thesis Cost
• Proofreading Thesis
• Thesis Editing Services
• Professional Thesis Editing
• Thesis Editing Cost
• Proofreading Dissertation
• Dissertation Proofreading Cost
• Dissertation Proofreader
• Correção de Artigos Científicos
• Correção de Trabalhos Academicos
• Serviços de Correção de Inglês
• Correção de Dissertação
• Correção de Textos Precos
• 定額 ネイティブチェック
• Copy Editing
• FREE Courses
• Revision en Ingles
• Revision de Textos en Ingles
• Revision de Tesis
• Revision Medica en Ingles
• Revision de Tesis Precio
• Revisão de Artigos Científicos
• Revisão de Trabalhos Academicos
• Serviços de Revisão de Inglês
• Revisão de Dissertação
• Revisão de Textos Precos
• Corrección de Textos en Ingles
• Corrección de Tesis
• Corrección de Tesis Precio
• Corrección Medica en Ingles
• Corrector ingles

Select Page

How To Write a Table of Contents for Academic Papers

Posted by Rene Tetzner | Mar 17, 2021 | How To Get Published | 0 |

How To Write a Table of Contents for Academic Papers Although every author begins a writing project with the best of intentions and an ideal outline in mind, it often proves difficult to stick to one’s initial plans as the text begins to unfold and its complexities grow in number and depth. Sometimes a document quickly exceeds the word limits for a project, and at others certain important aspects are neglected or turn out a good deal shorter than intended. Drafting a working table of contents for your writing project can provide an excellent tool for keeping your discussion on track and your text within length requirements as you write.

A working table of contents should begin with a title. This title may change as you draft your text, but a working title will help you focus your thoughts as you devise the headings and plan the content for the main parts, chapters, sections and subsections that should be added beneath it. All headings, whether numbered or not, should be formatted in effective and consistent ways that distinguish section levels and clearly indicate the overall structure of the text. These headings can also be altered as your writing advances, but they will provide an effective outline of what you need to discuss and the order in which you think the main topics should be presented. At this initial stage, it is also a good idea to write under each heading a brief summary of or rough notes about what you hope to include in that part of the document, and you can continue to add, adjust and move material around within and among the sections as your table of contents and ultimately your text progresses. Reminders of how long (measured in words, paragraphs or pages) the entire text and each of its parts should ideally be may also prove helpful.

Once you have your annotated table of contents drafted, it will serve as an informative list of both content and order that can be productively consulted as you write. Assuming you construct your working table of contents as a computer file in the same program you intend to use for writing the entire document, you can also use the table of contents as a template for composing the text as a whole, replacing your rough notes under each heading with the formal text as you draft it. This practice lends an immediate physical presence to the guidance provided by your table of contents because you are literally working within that outline, which can be especially wise if you tend to run on or become distracted by new ideas as you write.

Finally, your working table of contents can become your final table of contents if one is required for your project. If you would like to use the working table of contents in this way and are also using it as a template, be sure to rename the file and save a separate copy before you begin adding the formal text of your document. Then you can simply delete your summaries and rough notes from the original table of contents to make your final one, leaving only the headings, to which you can add relevant page numbers as required.

You might be interested in Services offered by Proof-Reading-Service.com

Journal editing.

Journal article editing services

PhD thesis editing services

Scientific Editing

Manuscript editing.

Manuscript editing services

Expert Editing

Expert editing for all papers

Research Editing

Research paper editing services

Professional book editing services

Related Posts

Choosing the Right Journal

September 10, 2021

Example of a Quantitative Research Paper

September 4, 2021

What Is a Good H-Index Required for an Academic Position?

September 3, 2021

Acknowledgements Example for an Academic Research Paper

September 1, 2021

Our Recent Posts

Our review ratings

• Examples of Research Paper Topics in Different Study Areas Score: 98%
• Dealing with Language Problems – Journal Editor’s Feedback Score: 95%
• Making Good Use of a Professional Proofreader Score: 92%
• How To Format Your Journal Paper Using Published Articles Score: 95%
• Journal Rejection as Inspiration for a New Perspective Score: 95%

Explore our Categories

• Abbreviation in Academic Writing (4)
• Career Advice for Academics (5)
• Dealing with Paper Rejection (11)
• Grammar in Academic Writing (5)
• Help with Peer Review (7)
• How To Get Published (146)
• Paper Writing Advice (17)
• Referencing & Bibliographies (16)

Table of Contents APA

Ai generator.

Writing academic papers and essays in APA (American Psychological Association) format requires adherence to specific guidelines and formatting rules. Among these essential elements is the Table of Contents, which serves as a roadmap for readers, enabling them to navigate through the document efficiently. In this article, we will delve into the definition and purpose of a Table of Contents in APA format, provide a step-by-step guide on how to create one, address frequently asked questions, and explore the importance of this element in academic writing.

1. Apa Table Of Contents Template

• Google Docs
• Apple Pages

2. Employee Handbook Table Of Contents Template

3. Research Paper Table of Contents Template

4. Business Plan Table of Contents Template

5. Research Proposal Table Of Contents Template

6. APA 6th Edition Table of Contents

7. Table of Contents APA Format

Size: 884 KB

8. Table of Contents APA Referencing Style

9. Table of Contents APA Example

Size: 496 KB

10. Table of Contents APA Template

Size: 622 KB

11. Table of Contents APA 7th Edition

Size: 42 KB

12. Sample Table of Contents APA

Size: 924 KB

13. Table of Contents APA Bibliography

Size: 684 KB

14. Simple Table of Contents APA

Size: 975 KB

15. Table of Contents APA Guide

16. Table of Contents APA Edition

17. Table of Contents APA 6th Edition

Size: 775 KB

18. Table of Contents APA Style

19. Table of Contents And Figures APA

Size: 23 MB

20. Table of Contents Research Paper APA

Size: 223 KB

21. Basic Table of Contents APA

Size: 137 KB

22. Standard Table of Contents APA

Size: 787 KB

What is A Table of Contents in APA format?

A Table of Contents in APA format is a structured list that appears at the beginning of a research paper, dissertation, or any other lengthy document, summarizing its contents and providing page references for each section. It allows readers to locate specific information quickly and facilitates efficient navigation throughout the document. The Table of Contents serves as a visual aid, providing an organized overview of the document’s structure, headings, and subheadings.

How to Write a Table of Contents in APA Format

Crafting a well-organized and reader-friendly Table of Contents is an essential aspect of writing academic papers in APA (American Psychological Association) format. This step-by-step guide will walk you through the process of creating a Table of Contents that adheres to APA guidelines. By following these simple instructions, you can ensure that your document is structured effectively, enabling readers to navigate your work with ease and locate the information they seek efficiently. Let’s dive into the details of this comprehensive guide on creating a Table of Contents in APA format.

Step 1: Prepare Your Document Structure

Before creating the Table of Contents, ensure that your document has a well-structured outline format . Begin by developing a clear introduction that provides an overview of your topic or research question. Follow this with the body of your paper, consisting of relevant sections and subsections that present your arguments or findings. Finally, conclude your paper with a thoughtful summary or conclusion paragraph.

Step 2: Insert Headings and Subheadings

Using appropriate headings and subheadings is crucial in APA format. Place your cursor at the beginning of each major section or subsection and apply the appropriate heading style. APA format utilizes specific heading levels, such as Level 1 for main sections and Level 2 for subsections, to maintain a consistent hierarchy and ensure clarity.

Step 3: Assign Page Numbers

Once your headings and subheadings are in place, assign page numbers to each section of your document. APA format typically requires page numbers to be positioned at the top right corner of each page. Ensure that your page numbering is continuous throughout the entire document, including the Table of Contents.

Step 4: Generate the Table of Contents

After completing the previous steps, it’s time to generate the Table of Contents. In most word processing software, this feature can be found under the “References” or “Layout” tab. Select the appropriate formatting options, such as including dot leaders between the heading titles and corresponding page numbers. Once generated, review the Table of Contents to ensure accuracy.

Why is the Table of Contents important?

The Table of Contents provides readers with a concise overview of the document’s structure, allowing them to navigate through the content efficiently. It saves time by providing quick access to specific sections, enabling readers to locate relevant information promptly.

Should the Table of Contents be on a separate page?

Yes, the Table of Contents should be placed on a separate page following the cover page and abstract (if applicable). This ensures that it is easily identifiable and distinguishes it from the main body of the document.

Can I change the formatting of the Table of Contents?

Yes, you can customize the formatting of the Table of Contents to some extent. However, it is essential to follow APA guidelines for font style, size, and spacing. Straying too far from the standard format may compromise the professionalism and consistency of your document.

In academic writing, the Table of Contents serves as a valuable navigational tool, guiding readers through the complex structure of a research paper or dissertation. By following the APA format guidelines and employing a clear and organized structure, you can create a comprehensive Table of Contents that enhances the understanding of your research paper’s structure, saving time and improving the overall readability of your work. So, the next time you embark on an academic writing journey, remember the significance of a well-crafted Table of Contents in APA format. By meticulously following the step-by-step guide provided in this article, you can confidently present your research, arguments, or findings while maintaining the professional standards expected in academic writing. So, check things you have to know about writing papers and essays here and make sure to incorporate a well-designed Table of Contents, as it is a vital component of any scholarly document. Happy writing!

Text prompt

• Instructive
• Professional

10 Examples of Public speaking

20 Examples of Gas lighting

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Happiness Hub Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• Happiness Hub
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Education and Communications
• Technical Writing

How to Write a Table of Contents

Last Updated: June 16, 2024 Fact Checked

This article was co-authored by Stephanie Wong Ken, MFA . Stephanie Wong Ken is a writer based in Canada. Stephanie's writing has appeared in Joyland, Catapult, Pithead Chapel, Cosmonaut's Avenue, and other publications. She holds an MFA in Fiction and Creative Writing from Portland State University. This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources. This article has been viewed 1,062,932 times.

The Table of Contents in a document acts as a map for the reader, making it easier for them to find information in the document based on title and page number. A good Table of Contents should be organized, easy to read and simple to use. You can write a Table of Contents manually on your computer or have a word processing tool create it for you. Make sure the Table of Contents is formatted properly in your final document so it is as accurate and accessible as possible.

Writing a Table of Contents

To write a simple table of contents, create a new page in your document and type the names of the chapters or sections of your piece of writing. Then, use your word processing program to insert the page number where each section starts. If you move things around, the page number in your table of contents will automatically update.

Sample Tables of Contents

Creating the Table of Contents on a Word Processor

• The Table of Contents should be on its own page. Do not include the introduction or a dedication on the same page as the Table of Contents.

• For example, you may write down main headings like, “Introduction,” “Case Study 1,” or “Conclusion.”

• For example, under the main heading “Introduction” you may write the subheading, “Themes and Concepts.” Or under the main heading “Conclusion” you may write, “Final Analysis.”
• You can also include sub-subheadings underneath the subheadings, if applicable. For example, under the subheading “Themes and Concepts” you may have the sub-subheading, “Identity.”
• Some papers do not have subheadings at all, only main headings. If this is the case, skip this step.

• For example, if the “Introduction” section begins on page 1, you will attach “page 1” to the Introduction heading. If the “Conclusion” section begins on page 45, attach “page 45” to the Conclusion heading.

• Check that the subheadings are located underneath the correct headings, indented to the right.
• Make sure there are page numbers for the subheadings listed as well.
• You can center the content in the table using the table options if you want the content to appear a few spaces away from the lines of the table. You can also leave the content indented to the left if you'd prefer.

• You can put the title above the table or in a separate row on the top of the rest of the content.

Using a Word Processing Tool

• You should also confirm the page numbers are correct in the document. Each page should be numbered in order. Having the correct page numbers will ensure the Table of Contents is created correctly when you use the word processing tool.

• If there are subheadings in your document, label them “Heading 2.” Highlight each subheading and click on “Heading 2” in the Styles tab.
• If there are sub-subheadings in your document, label them “Heading 3.” Highlight each subheading and click on “Heading 3” in the Styles tab.
• The text and font for each main heading may change based on the settings for “Heading 1,” “Heading 2,” and “Heading 3.” You can choose your preferred text and font for each main heading so they appear as you like in the Table of Contents.

• You can choose the built-in Table of Content options, where the tool will automatically choose a font size and style for you.
• You can also go for from a list of custom Table of Contents, where you choose the font color and size based on your preferences.

Polishing the Table of Contents

• You should also check the subheadings or sub-subheadings in the Table of Contents, if applicable, to ensure they match those in the document.

• If you created the Table of Contents manually, do this by going in and adjusting the headings and/or the page numbers when they change.
• If you created the Table of Contents with a word processing tool, update it by clicking the Update option by the Table of Contents option on the Reference tab. You can side clicking on the Table of Contents and choosing “update” that way.

Community Q&A

You Might Also Like

• ↑ https://edu.gcfglobal.org/en/word-tips/how-to-create-a-table-of-contents-in-word/1/#
• ↑ https://examples.yourdictionary.com/reference/examples/table-of-content-examples.html
• ↑ http://bitesizebio.com/21549/using-word-to-write-your-thesis-making-a-table-of-contents-inserting-captions-and-cross-referencing/
• ↑ https://guides.lib.umich.edu/c.php?g=283073&p=1886010
• ↑ https://nsufl.libguides.com/c.php?g=413851&p=2820026

About This Article

To write a table of contents, open a new document and list the major headings, titles, or chapters of the project in chronological order. Next, insert subheadings or subtopics if your project has those. Fill in the page number where each heading starts, then format the content in a table with 2 columns. Place the headings and subheadings in order in the first column, then put the page numbers in the second column. Don't forget to add a "Table of Contents" title at the top of the document! To learn more about polishing your Table of Contents, read on! Did this summary help you? Yes No

• Send fan mail to authors

Reader Success Stories

Mar 22, 2017

Did this article help you?

Mar 3, 2022

Feb 1, 2018

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

wikiHow Tech Help Pro:

Develop the tech skills you need for work and life

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction

Copyright Page

Dedication, acknowledgements, preface (optional), table of contents.

• List of Tables, Figures, and Illustrations

List of Abbreviations

List of symbols.

• Non-Traditional Formats
• Font Type and Size
• Spacing and Indentation
• Tables, Figures, and Illustrations
• Formatting Previously Published Work
• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

I. Order and Components

Please see the sample thesis or dissertation pages throughout and at the end of this document for illustrations. The following order is required for components of your thesis or dissertation:

• Dedication, Acknowledgements, and Preface (each optional)
• Table of Contents, with page numbers
• List of Tables, List of Figures, or List of Illustrations, with titles and page numbers (if applicable)
• List of Abbreviations (if applicable)
• List of Symbols (if applicable)
• Introduction, if any
• Main body, with consistent subheadings as appropriate
• Appendices (if applicable)
• Endnotes (if applicable)
• References (see section on References for options)

Many of the components following the title and copyright pages have required headings and formatting guidelines, which are described in the following sections.

Please consult the Sample Pages to compare your document to the requirements. A Checklist is provided to assist you in ensuring your thesis or dissertation meets all formatting guidelines.

The title page of a thesis or dissertation must include the following information:

• The title of the thesis or dissertation in all capital letters and centered 2″ below the top of the page.
• Your name, centered 1″ below the title. Do not include titles, degrees, or identifiers. The name you use here does not need to exactly match the name on your university records, but we recommend considering how you will want your name to appear in professional publications in the future.

Notes on this statement:

• When indicating your degree in the second bracketed space, use the full degree name (i.e., Doctor of Philosophy, not Ph.D. or PHD; Master of Public Health, not M.P.H. or MPH; Master of Social Work, not M.S.W. or MSW).
• List your department, school, or curriculum rather than your subject area or specialty discipline in the third bracketed space. You may include your subject area or specialty discipline in parentheses (i.e., Department of Romance Languages (French); School of Pharmacy (Molecular Pharmaceutics); School of Education (School Psychology); or similar official area).
• If you wish to include both your department and school names, list the school at the end of the statement (i.e., Department of Pharmacology in the School of Medicine).
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Public Policy.
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the School of Dentistry (Endodontics).
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the Department of Nutrition in the Gillings School of Global Public Health.
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the School of Education (Cultural Studies and Literacies).
• The words “Chapel Hill” must be centered 1″ below the statement.
• One single-spaced line below that, center the year in which your committee approves the completed thesis or dissertation. This need not be the year you graduate.
• Approximately 2/3 of the way across the page on the right-hand side of the page, 1″ below the year, include the phrase “Approved by:” (with colon) followed by each faculty member's name on subsequent double-spaced lines. Do not include titles such as Professor, Doctor, Dr., PhD, or any identifiers such as “chair” or “advisor” before or after any names. Line up the first letter of each name on the left under the “A” in the “Approved by:” line. If a name is too long to fit on one line, move this entire section of text slightly to the left so that formatting can be maintained.
• No signatures, signature lines, or page numbers should be included on the title page.

Include a copyright page with the following information single-spaced and centered 2″ above the bottom of the page:

© Year Author's Full Name (as it appears on the title page) ALL RIGHTS RESERVED

This page immediately follows the title page. It should be numbered with the lower case Roman numeral ii centered with a 1/2″ margin from the bottom edge.

Inclusion of this page offers you, as the author, additional protection against copyright infringement as it eliminates any question of authorship and copyright ownership. You do not need to file for copyright in order to include this statement in your thesis or dissertation. However, filing for copyright can offer other protections.

See Section IV for more information on copyrighting your thesis or dissertation.

Include an abstract page following these guidelines:

• Include the heading “ABSTRACT” in all capital letters, and center it 2″ below the top of the page.
• One double-spaced line below “ABSTRACT”, center your name, followed by a colon and the title of the thesis or dissertation. Use as many lines as necessary. Be sure that your name and the title exactly match the name and title used on the Title page.
• One single-spaced line below the title, center the phrase “(Under the direction of [advisor's name])”. Include the phrase in parentheses. Include the first and last name(s) of your advisor or formal co-advisors. Do not include the name of other committee members. Use the advisor's name only; do not include any professional titles such as PhD, Professor, or Dr. or any identifiers such as “chair” or “advisor”.
• Skip one double-spaced line and begin the abstract. The text of your abstract must be double-spaced and aligned with the document's left margin with the exception of indenting new paragraphs. Do not center or right-justify the abstract.
• Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation.
• Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge.

Please write and proofread your abstract carefully. When possible, avoid including symbols or foreign words in your abstract, as they cannot be indexed or searched. Avoid mathematical formulas, diagrams, and other illustrative materials in the abstract. Offer a brief description of your thesis or dissertation and a concise summary of its conclusions. Be sure to describe the subject and focus of your work with clear details and avoid including lengthy explanations or opinions.

Your title and abstract will be used by search engines to help potential audiences locate your work, so clarity will help to draw the attention of your targeted readers.

You have an option to include a dedication, acknowledgements, or preface. If you choose to include any or all of these elements, give each its own page(s).

A dedication is a message from the author prefixed to a work in tribute to a person, group, or cause. Most dedications are short statements of tribute beginning with “To…” such as “To my family”.

Acknowledgements are the author's statement of gratitude to and recognition of the people and institutions that helped the author's research and writing.

A preface is a statement of the author's reasons for undertaking the work and other personal comments that are not directly germane to the materials presented in other sections of the thesis or dissertation. These reasons tend to be of a personal nature.

Any of the pages must be prepared following these guidelines:

• Do not place a heading on the dedication page.
• The text of short dedications must be centered and begin 2″ from the top of the page.
• Headings are required for the “ACKNOWLEDGEMENTS” and “PREFACE” pages. Headings must be in all capital letters and centered 2″ below the top of the page.
• The text of the acknowledgements and preface pages must begin one double-spaced line below the heading, be double-spaced, and be aligned with the document's left margin with the exception of indenting new paragraphs.
• Subsequent pages of text return to the 1″ top margin.
• The page(s) must be numbered with consecutive lower case Roman numerals (starting with the page number after the abstract) centered with a 1/2″ margin from the bottom edge.

Include a table of contents following these guidelines:

• Include the heading “TABLE OF CONTENTS” in all capital letters, and center it 2″ below the top of the page.
• Include one double-spaced line between the heading and the first entry.
• The table of contents should not contain listings for the pages that precede it, but it must list all parts of the thesis or dissertation that follow it.
• If relevant, be sure to list all appendices and a references section in your table of contents. Include page numbers for these items but do not assign separate chapter numbers.
• Entries must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Major subheadings within chapters must be included in the table of contents. The subheading(s) should be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, break up the entry about three-fourths of the way across the page and place the rest of the text on a second line, single-spacing the two lines.
• Include one double-spaced line between each entry.
• Page numbers listed in the table of contents must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Information included in the table of contents must match the headings, major subheadings, and numbering used in the body of the thesis or dissertation.
• The Table of Contents page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

Lists of Tables, Figures, and Illustrations

If applicable, include a list of tables, list of figures, and/or list of illustrations following these guidelines:

• Include the heading(s) in all capital letters, centered 1″ below the top of the page.
• Each entry must include a number, title, and page number.
• Assign each table, figure, or illustration in your thesis or dissertation an Arabic numeral. You may number consecutively throughout the entire work (e.g., Figure 1, Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number to indicate its consecutive placement in the chapter (e.g., Table 3.2 is the second table in Chapter Three).
• Numerals and titles must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Page numbers must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Numbers, titles, and page numbers must each match the corresponding numbers, titles, and page numbers appearing in the thesis or dissertation.
• All Lists of Tables, Figures, and Illustrations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use abbreviations extensively in your thesis or dissertation, you must include a list of abbreviations and their corresponding definitions following these guidelines:

• Include the heading “LIST OF ABBREVIATIONS” in all capital letters, and center it 1″ below the top of the page.
• Arrange your abbreviations alphabetically.
• Abbreviations must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, single-space between the two lines.
• The List of Abbreviations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use symbols in your thesis or dissertation, you may combine them with your abbreviations, titling the section “LIST OF ABBREVIATIONS AND SYMBOLS”, or you may set up a separate list of symbols and their definitions by following the formatting instructions above for abbreviations. The heading you choose must be in all capital letters and centered 1″ below the top of the page.

Previous: Introduction

Next: Format

WTO / Personal / Lists / Free Table of Contents Templates (for Microsoft Word)

Free Table of Contents Templates (for Microsoft Word)

Whether you are writing a book, large essay, dissertation, or other longer academic papers, you will have to include a table of contents. It will act as a roadmap for the reader to each portion of your writing. It helps the reader to locate specific information in a document or revisit their favorite parts easily within the text. A well-structured TOC should simplify the way the reader finds what they are looking for and should always be placed on a separate page, just after the first page of an academic paper and after the abstract.

Depending on the type of writing , you may find that different documents require different styles of a TOC. Some may require numbers, while others may require a non-numbered TOC. It is, therefore, the writer’s duty to check the type of TOC they are required to include in their writing.

Free Table of Contents Templates

Simple templates

What is a Table of Contents?

A Table of Contents (TOC) is an organized list of all the parts of a document or book organized in the order in which the parts appear.

The TOC usually contains the titles, chapters, figures, and major sections of a document clearly labeled by their page number. It should be added last or updated after completing the whole document or book to capture all the contents accurately.

The Purpose of table of contents

If a book, business proposal, business report , or publication is long enough to include chapters, then a TOC will likely be included at the beginning of the book, report, or publication.

The TOC provides a sequential list of the book’s organizational structure, most commonly denoting the title, chapter number, and the starting page location. The chapter, page number, and title will help guide the reader in finding specific sections.

Basically, it serves two main purposes; one is to provide the reader with a general overview of what is contained in the document and how the content is organized, and the other is to enable the reader to go directly to the specific section of an on-line document.

Key Elements of a Table of Contents

The TOC is where one lists the chapters and major sections of their document, together with their page numbers. A clear and well-out table is very important as it indicates a quality paper is structured.

The key elements that should be included in the TOC are:

• The page titles
• Clear headings and subheadings
• The page numbers that show where in the document each section can be found

When creating your table, make sure to include all level one and two headings. You may also decide to include level three headings, although they are optional to include and should not be included in the TOC has reached its maximum length of two pages.

Level One:   CHAPTER 2: Literature Review

Level Two: 2.1 Overview of Information

Level Three: 2.1.1 Discipline of Knowledge

Ensure that you use clear headings throughout your document to make your table easy to understand. Keep in mind that the reader will see the table first before reading through your document.

Other things to include in your table include the appendices and tables. Including these two, however, depend largely on how many there are in your document.

If there are more than three tables and figures, you might consider listing them on a separate page. Else, you can include them in your table.

Steps to Create a Table of Contents in MS Word

For you to create a TOC in Microsoft Word, you must first define what you’d like to include in this part. First, start off by applying the different heading styles throughout your document.

Once you’ve done that, follow these steps to insert a TOC in MS Word automatically:

Add a title on the TOC page. Ensure that you follow the standard format specific to your document or as per your department’s guidelines.

Put your cursor where you want the table to go. The table is usually included between the abstract and the introduction.

In the ribbon, find the reference section and locate the TOC section. Use the search tab on the ribbon to search for the table.

Click the arrow that is next to the TOC icon and select Custom Table of Contents. Here, select the level of heading that you would like to include in your table and also make the necessary adjustments to each level by clicking the modify button.

Click on Custom table of contents.

After you’ve made sure that everything is OK. Click OK, and your TOC will be automatically generated.

Tips on Preparing Table of Contents

It is recommended that you use your TOC template last after to make sure that it provides a clear overview of your document. You can still draw up a mock TOC in your early stages of writing to help you formulate a structure and think through your topics and how you are going to research.

Make sure that all the heading levels are properly defined in your document before inserting the template.

Remember that the reader will most likely go through your table first before diving into the document to get an overview of what to expect. Make sure that your TOC is clear and that it captures your entire document.

Frequently Asked Questions

No, the TOC is basically a snapshot of the headings, tables, and page numbers in a document and does not automatically update itself as you make changes. Anytime you make changes to your document, you can update it by simply right-clicking on it and selecting the update field.

No, the TOC is usually included between the abstract and the introduction.

Yes, the maximum length of a TOC should be two pages, regardless of the type of document you are writing.

Regardless of your document’s type or size, using a TOC can help direct the readers to exactly where they want to be. Other than making your document more reader-friendly , the table also makes it easier for the author to go back and change or update contents throughout their document if necessary. By default, MS Word generates a TOC when you use the first three built-in heading styles, i.e., Heading 1, Heading 2, and Heading 3. To apply the different heading styles, simply select the style from the “Home” tab, or you can use a TOC template. Once you’ve properly defined the heading styles, follow the procedure given above to insert your table automatically.

About This Article

Was this helpful?

Great! Tell us more about your experience

Not up to par help us fix it, keep reading.

12 Free Shot List Templates for Production (Word, PDF)

30 Free Price List Templates (Price Sheets) – Printable

Education , Log Sheets

How to make a reading log (32 free templates & ideas).

Analysis , Charts

Free raci chart templates in excel and word, thank you for your feedback.

Your Voice, Our Progress. Your feedback matters a lot to us.

• Link to facebook
• Link to linkedin
• Link to twitter
• Link to youtube
• Writing Tips

How to Structure a Business Report

5-minute read

• 14th March 2019

The content of a business report will depend on what you are writing about. Even the writing style may depend on who you are writing for (although clear, concise and formal is usually best). However, there is a general structure that most business reports follow. In this post, then, we’ll look at how to structure a business report for maximum clarity and professionalism.

1. Title Page

Every business report should feature a title page . The title itself should clearly set out what the report is about. Typically, you should also include your name and the date of the report.

Most business reports begin with a summary of its key points. Try to include:

• A brief description of what the report is about
• How the report was completed (e.g., data collection methods)
• The main findings from the research
• Key conclusions and recommendations

A paragraph or two should suffice for this in shorter business reports. However, for longer or more complex reports, you may want to include a full executive summary .

3. Table of Contents

Short business reports may not need a table of contents, especially if they include a summary. But longer reports should set out the title of each section and the structure of the report. Make sure the headings here match those used in the main text. You may also want to number the sections.

4. Introduction

The introduction is the first part of the report proper. Use it to set out the brief you received when you were asked to compile the report. This will frame the rest of the report by providing:

• Background information (e.g., business history or market information)
• The purpose of the report (i.e., what you set out to achieve)
• Its scope (i.e., what the report will cover and what it will ignore)

These are known as the “terms of reference” for the business report.

5. Methods and Findings

If you are conducting original research, include a section about your methods. This may be as simple as setting out the sources you are using and why you chose them. But it could also include how you have collected and analyzed the data used to draw your conclusions.

After this, you will need to explain your findings. This section will present the results of your research clearly and concisely, making sure to cover all the main points set out in the brief.

Find this useful?

Subscribe to our newsletter and get writing tips from our editors straight to your inbox.

One tip here is to break the findings down into subsections, using headings to guide the reader through your data. Using charts and illustrations , meanwhile, can help get information across visually, but make sure to label them clearly so the reader knows how they relate to the text.

6. Conclusions and Recommendations

The last main section of your report will cover conclusions and recommendations. The conclusion section should summarize what you have learned from the report. If you have been asked to do so, you should also recommend potential courses of action based on your conclusions.

If you are not sure what to suggest here, think back to the objectives set out in your brief.

7. References

If you have used any third-party sources while writing your report, list them in a bibliography after the main report. This could include other business documents, academic articles, or even news reports. The key is to show what you have based your findings and conclusions upon.

8. Appendices (If Applicable)

Finally, you may have gathered extra documentation during your research, such as interview transcripts, marketing material, or financial data. Including this in the main report would make it too long and unfocused, but you can add it to an appendix (or multiple appendices) at the end of the document. It will then be available should your reader need it.

Summary: How to Structure a Business Report

If you are writing a business report, aim to structure it as follows:

• Title Page – Include a clear, informative title, your name, and the date.
• Summary – A brief summary of what the report is about, the data collection methods used, the findings of the report, and any recommendations you want to make.
• Table of Contents – For longer reports, include a table of contents.
• Introduction –Set out the brief you were given for the report.
• Methods and Findings – A description of any methods of data collection and analysis used while composing the report, as well as your findings.
• Conclusions and Recommendations – Any conclusions reached while writing the report, plus recommendations for what to do next (if required).
• References – Sources used in your report listed in a bibliography.
• Appendices – If you have supporting material (e.g., interview transcripts, raw data), add it to an appendix at the end of the document.

Don’t forget, too, that a business report should be clear, concise, and formal. And if you would like help making sure that your business writing is easy to read and error free, just let us know .

Share this article:

Post A New Comment

Got content that needs a quick turnaround? Let us polish your work. Explore our editorial business services.

Free email newsletter template (2024).

Promoting a brand means sharing valuable insights to connect more deeply with your audience, and...

6-minute read

How to Write a Nonprofit Grant Proposal

If you’re seeking funding to support your charitable endeavors as a nonprofit organization, you’ll need...

9-minute read

How to Use Infographics to Boost Your Presentation

Is your content getting noticed? Capturing and maintaining an audience’s attention is a challenge when...

8-minute read

Why Interactive PDFs Are Better for Engagement

Are you looking to enhance engagement and captivate your audience through your professional documents? Interactive...

7-minute read

Seven Key Strategies for Voice Search Optimization

Voice search optimization is rapidly shaping the digital landscape, requiring content professionals to adapt their...

4-minute read

Five Creative Ways to Showcase Your Digital Portfolio

Are you a creative freelancer looking to make a lasting impression on potential clients or...

Make sure your writing is the best it can be with our expert English proofreading and editing.

Numbers, Facts and Trends Shaping Your World

Read our research on:

Full Topic List

Regions & Countries

• Publications
• Our Methods
• Short Reads
• Tools & Resources

Read Our Research On:

Harris Energizes Democrats in Transformed Presidential Race

1. the presidential matchup: harris, trump, kennedy, table of contents.

• Other findings: Both Harris and Trump are viewed more favorably than a few months ago
• Voting preferences among demographic groups
• How have voters shifted their preferences since July?
• Harris’ supporters back her more strongly than Biden’s did last month
• Large gap in motivation to vote emerges between the candidates’ younger supporters
• Harris and Trump have gained ground with their own coalitions
• Share of ‘double negatives’ drops significantly with change in presidential candidates
• Views of Biden have changed little since his withdrawal from the 2024 presidential race
• Acknowledgments
• The American Trends Panel survey methodology

Nationally, Vice President Kamala Harris and former President Donald Trump are essentially tied among registered voters in the current snapshot of the presidential race: 46% prefer Harris, 45% prefer Trump and 7% prefer Robert F. Kennedy Jr.

Following Biden’s exit from the race, Trump’s support among voters has remained largely steady (44% backed him in July against Biden, while 45% back him against Harris today). However, Harris’ support is 6 percentage points higher than Biden’s was in July . In addition to holding on to the support of those who backed Biden in July, Harris’ bump has largely come from those who had previously said they supported or leaned toward Kennedy.

Harris performs best among the same demographic groups as Biden. But this coalition of voters is now much more likely to say they strongly support her: In July, 43% of Biden’s supporters characterized their support as strong – today, 62% of Harris’ do.

Overall, many of the same voting patterns that were evident in the Biden-Trump matchup from July continue to be seen today. Harris fares better than Trump among younger voters, Black voters, Asian voters and voters with college degrees. By comparison, the former president does better among older voters, White voters and voters without a college degree.

But Harris performs better than Biden across many of these groups – making the race tighter than it was just a few weeks ago.

• In July, women’s presidential preferences were split: 40% backed Biden, 40% preferred Trump and 17% favored Kennedy. With Harris at the top of the ticket, 49% of women voters now support her, while 42% favor Trump and 7% back Kennedy.
• Among men, Trump draws a similar level of support as he did in the race against Biden (49% today, compared with 48% in July). But the share of men who now say they support Harris has grown (to 44% today, up from 38% last month). As a result, Trump’s 10-point lead among men has narrowed to a 5-point lead today.

Race and ethnicity

Harris has gained substantial ground over Biden’s position in July among Black, Hispanic and Asian voters. Most of this movement is attributable to declining shares of support for Kennedy. Trump performs similarly among these groups as he did in July.

• 77% of Black voters support or lean toward Harris. This compares with 64% of Black voters who said they backed Biden a few weeks ago. Trump’s support is unchanged (13% then vs. 13% today). And while 21% of Black voters supported Kennedy in July, this has dropped to 7% in the latest survey.
• Hispanic voters now favor Harris over Trump by a 17-point margin (52% to 35%). In July, Biden and Trump were tied among Hispanic voters with 36% each.
• By about two-to-one, Asian voters support Harris (62%) over Trump (28%). Trump’s support among this group is essentially unchanged since July, but the share of Asian voters backing Harris is 15 points higher than the share who backed Biden in July.
• On balance, White voters continue to back Trump (52% Trump, 41% Harris), though that margin is somewhat narrower than it was in the July matchup against Biden (50% Trump, 36% Biden).

While the age patterns present in the Harris-Trump matchup remain broadly the same as those in the Biden-Trump matchup in July, Harris performs better across age groups than Biden did last month. That improvement is somewhat more pronounced among voters under 50 than among older voters.

• Today, 57% of voters under 30 say they support Harris, while 29% support Trump and 12% prefer Kennedy. In July, 48% of these voters said they backed Biden. Trump’s support among this group is essentially unchanged. And 12% now back Kennedy, down from 22% in July.
• Voters ages 30 to 49 are now about evenly split (45% Harris, 43% Trump). This is a shift from a narrow Trump lead among this group in July.
• Voters ages 50 and older continue to tilt toward Trump (50% Trump vs. 44% Harris).

With Harris now at the top of the Democratic ticket, the race has become tighter.

Much of this is the result of shifting preferences among registered voters who, in July, said they favored Kennedy over Trump or Biden.

Among the same group of voters surveyed in July and early August, 97% of those who backed Biden a few weeks ago say they support or lean toward Harris today. Similarly, Trump holds on to 95% of those who supported him a few weeks ago.

But there has been far more movement among voters who previously expressed support for Kennedy. While Kennedy holds on to 39% of those who backed him in July, the majority of these supporters now prefer one of the two major party candidates: By about two-to-one, those voters are more likely to have moved to Harris (39%) than Trump (20%). This pattern is evident across most voting subgroups.

In July, Trump’s voters were far more likely than Biden’s voters to characterize their support for their candidate as “strong” (63% vs. 43%). But that gap is no longer present in the Harris-Trump matchup.

Today, 62% of Harris voters say they strongly support her, while about a third (32%) say they moderately support her. Trump’s voters are just about as likely to say they strongly back him today as they were in July (64% today, 63% then).

Kennedy’s voters make up a smaller share of voters today than a month ago – and just 18% of his voters say they strongly support him, similar to the 15% who said the same in July.

Across demographic groups, strong support for Harris is higher than it was for Biden

Among women voters who supported Biden in July, 45% said they did so strongly. That has grown to 65% today among women voters who support Harris.

Increased intensity of support is similar among men voters who back the Democratic candidate: In July, 42% of men voters who supported Biden said they did so strongly. This has since grown to 59% of Harris’ voters who are men.

Across racial and ethnic groups, Harris’ supporters are more likely than Biden’s were to say they back their candidates strongly.

Among White voters, 43% who supported Biden in July did so strongly. Today, Harris’ strong support among White voters sits at 64%.

A near identical share of Harris’ Black supporters (65%) characterize their support for her as strong today. This is up from the 52% of Biden’s Black supporters who strongly backed him in July. Among Harris’ Hispanic supporters, 56% support her strongly, while 45% of Asian Harris voters feel the same. Strong support for Harris among these voters is also higher than it was for Biden in July.

Across all age groups, Harris’ strength of support is higher than Biden’s was. But the shift from Biden is less pronounced among older Democratic supporters than among younger groups.

Still, older Harris voters are more likely than younger Harris voters to describe their support as strong. For instance, 51% of Harris’ voters under 50 say they strongly support her, while 71% of Harris supporters ages 50 and older characterize their support as strong.

Today, about seven-in-ten of both Trump supporters (72%) and Harris supporters (70%) say they are extremely motivated to vote.

Motivation to vote is higher in both the Democratic and Republican coalitions than it was in July .

These shifts have occurred across groups but are more pronounced among younger voters.

Today, half of voters under 30 say they are extremely motivated to vote, up 16 points since July. Motivation is up 11 points among voters ages 30 to 49 and 50 to 64, and up 6 points among those ages 65 and older.

Among the youngest voters, the increased motivation to vote is nearly all driven by shifts among Democratic supporters.

• In July, 38% of 18- to 29-year-old Trump voters said they were extremely motivated to vote. Today, a similar share of his voters (42%) report that level of motivation.
• But 18- to 29-year-old Harris supporters are far more likely to say they are extremely motivated to vote than Biden’s supporters in this age group were about a month ago. Today, 61% of Harris’ voters under 30 say this. In July, 42% of voters under 30 who supported Biden said they were extremely motivated to vote.

Sign up for our weekly newsletter

Fresh data delivery Saturday mornings

Sign up for The Briefing

Weekly updates on the world of news & information

• Donald Trump
• Election 2024
• Kamala Harris
• More Leaders
• Political & Civic Engagement

Many Americans are confident the 2024 election will be conducted fairly, but wide partisan differences remain

Joe biden, public opinion and his withdrawal from the 2024 race, amid doubts about biden’s mental sharpness, trump leads presidential race, americans’ views of government’s role: persistent divisions and areas of agreement, cultural issues and the 2024 election, most popular, report materials.

• August 2024 Presidential Preference Detailed Tables
• Questionnaire

901 E St. NW, Suite 300 Washington, DC 20004 USA (+1) 202-419-4300 | Main (+1) 202-857-8562 | Fax (+1) 202-419-4372 |  Media Inquiries

Research Topics

• Email Newsletters

ABOUT PEW RESEARCH CENTER  Pew Research Center is a nonpartisan fact tank that informs the public about the issues, attitudes and trends shaping the world. It conducts public opinion polling, demographic research, media content analysis and other empirical social science research. Pew Research Center does not take policy positions. It is a subsidiary of  The Pew Charitable Trusts .

© 2024 Pew Research Center

Stay informed: Sign up for eNews

• Facebook (opens in new window)
• X (opens in new window)
• Instagram (opens in new window)
• YouTube (opens in new window)
• LinkedIn (opens in new window)

• Amazon (opens in new window)
• Barnes & Noble (opens in new window)
• Bookshop (opens in new window)
• UC Press (opens in new window)

About the Book

About the author, from our blog.

Black Health Care Workers are Suffering from Coronavirus Too—In More Ways Than One

Upcoming Talks with Adia Harvey Wingfield, author of Flatlining

To fix our broken health care system, include black providers, table of contents.

"Wingfield offers an engaging, insightful, and compelling portrait of the healthcare industry as a racialized (and gendered) organization that institutionalizes racial inequality through racial outsourcing and racial equity work." — American Journal of Sociology

• C. Wright Mills Award 2019 2020 , Society for the Study of Social Problems