abstracts for research proposals

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

• Customer Reviews
• Extended Essays
• IB Internal Assessment
• Theory of Knowledge
• Literature Review
• Dissertations
• Essay Writing

Research Writing

• Assignment Help
• Capstone Projects
• College Application
• Online Class

Abstract for Research Proposal: Types and How to Write It

0    comments

An abstract in a research proposal summarizes the main aspect of the assignment in a given sequence in 300 words or less. It highlights the purpose of the study, the research problem, design of the study, findings, summary of your interpretations and conclusions.

For what it’s worth, the abstract of your research proposal should give a clear and concise elaboration of the major aspects of an issue you’ve investigated.

In this guide, you’ll learn how to write an abstract for any research proposal. We’ll look at why an abstract is important, the types of abstracts, writing style, and what to avoid when it comes to writing an abstract for your research proposal.

Types of Abstracts for a Research Proposal

There are four types of abstracts that you can write for a research proposal :

• Critical abstract
• Descriptive abstract
• Informative abstract
• Highlight abstract

1. Critical abstract

A critical abstract in a research proposal describes the primary findings and gives a solid judgment on the validity, completeness, and reliability of the study. It’s your responsibility as a researcher to evaluate your work and then compare it with already existing work on the same subject.

Because a critical abstract includes an additional commentary, it tends to longer. Often, the length falls between 400 and 500 words. However, do keep in mind that this type of an abstract is very are, which means your instructor may never ask you to write a critical abstract for your research proposal.

2. Highlight Abstract

A highlight abstract is a piece of writing that can’t stand independent of its associated document. It uses incomplete and leading remarks, with the primary goal of grabbing the attention of the reader to the study.

Professors have made it clear that a highlight abstract is not by itself a true abstract to use in a research proposal. Since it cannot stand on its away separate from the associated article, it’s unlikely that your teacher will ask you to use it in academic writing.

3. Descriptive abstract

A descriptive abstract gives a short description of the research proposal. It may include purpose, method, and the scope of the research, and it’s often 100 words or less in length. Some people consider it to be an outline of the research proposal rather than an actual abstract for the document.

While a descriptive abstract describes the type of information a reader will find in a research proposal, it neither critics the work nor provides results and conclusion of the study.

4. Informative Abstract

Many abstracts in academic writing are informative. They don’t analyze the study or investigation that you propose, but they explain a research project in a way that they can stand independently. In other words, an informative abstract gives an explanation for the main arguments, evidence, and significant results.

In addition to featuring purpose, method, and scope, an informative abstract also include the results, conclusion, as well as the recommendation of the author. As for the length, an informative abstract should not be more than 300 words.

How to Write an Abstract for a Research Proposal

Of the four type of abstracts that we’ve discussed above, an informative abstract is what you’ll need to write in your research proposal. Writing an abstract for a research proposal isn’t difficult at all. You only need to know what to write and how to write it, and you’re good to get started.

1. Write in Active Voice

First, use active voice when writing an abstract for your research proposal. However, this doesn’t mean you should avoid passive voice in entirety. If you find that some sentences can’t make sense unless with passive sentence construction, feel free to bend this rule somewhat.

Second, make sure your sentences are concise and complete. Refrain from using ambiguous words. Keep the language simple instead.

Lastly, never use present or future tense to write an abstract for a research proposal. You’re reporting a study that you’ve already conducted and therefore writing in past sense makes the most sense.

Your abstract should come immediately after the title page. Write in block format without paragraph indentations. The abstract should not be more than 300 words long and the page should not have a number. The word “Abstract” in your research proposal should be center aligned in the page, unless otherwise stated.

In addition to these formatting rules, the last sentence of your abstract should summarize the application to practice or the conclusions of your study. In the case where it seems appropriate, you might want follow this by statement that suggests a need for additional research.

3. Time to Write the Abstract

There are no hard rules on when to write an abstract for a research proposal. Some students choose to write the section first while others choose to write it last. We strongly recommend that you write the abstract last because it’s a summary of the whole paper. You can also write it in the beginning if you’ve already outlined your draft and know what you want to talk about even before you start writing.

Your informative abstract is subject to frequent changes as you work on your paper, and that holds whether you write the section first or last. Be flexible and tweak this part of the assignment as necessary. Also, make sure you report statistical findings in parentheses.

Read abstract to be sure the summary of the study agrees with what you’ve written in your proposal. As we mentioned earlier, this section is subject to change depending on the direction your research takes. So make sure you identify and correct any anomalies if any.

Mistakes to Avoid When Writing an Abstract for Research Proposal

To wind up this guide, here are some of the most common mistakes that you should avoid when writing an abstract for your research proposal:

• Avoid giving a lengthy background
• Don’t include citations to other people’s work
• An abstract shouldn’t include a table, figure, image, or any kind of illustration
• Don’t include terms that are difficult to understand

You may also like

Can turnitin detect the essays i’ve bought online, how to write a last minute essay: 6 tips for better grades, subscribe to our newsletter now.

Stay ahead of the AI revolution.

How to Write an Abstract for a Research Proposal

If you're writing a research proposal, it's likely that you'll be asked to include an abstract. An abstract, in essence, is a summary of your proposal. It should convey the main objectives, methods, and results of your research, as well as its significance and potential implications. In this article, we'll guide you through the process of writing an effective abstract for your research proposal, providing you with key tips and insights to help you succeed.

Understanding the Purpose of an Abstract

Before we dive too deeply into the process of writing an abstract, it's important to understand why it's so critical. Essentially, an abstract serves as a way to communicate the core ideas of your research in a concise and accessible format. It allows readers to quickly grasp the significance and relevance of your work, even if they don't have time to read your entire proposal or report. In short, the abstract serves as a first impression, and it's crucial that you make it count.

The Role of an Abstract in a Research Proposal

The abstract is the first section of your research proposal. It should appear at the beginning of your document, immediately following the title page. In terms of content, your abstract should distill the most important aspects of your proposal into a highly readable, condensed format. The goal is to convey a clear and accurate representation of your research, without getting bogged down in unnecessary details.

Key Elements to Include in an Abstract

When writing your abstract, there are several key elements you'll want to include. These elements will help ensure that your abstract provides an accurate and compelling overview of your research. Here are some of the key elements to consider:

• The research problem or question you're addressing.
• Your research methodology and design.
• Key findings or results.
• A statement about the significance and potential implications of your research.

Preparing to Write Your Abstract

Before diving into the writing process, it's important to take some time to prepare for drafting your abstract. This involves several key steps, including:

Analyzing Your Research Proposal

First, you'll want to carefully review your research proposal. Consider the central problem or question you're addressing, as well as the methodology and data you're using to address it. Look for the most important points and objectives of your research. This will help you determine which elements to focus on in your abstract.

Identifying the Main Points and Objectives

Once you have thoroughly analyzed your proposal, it's time to identify the main points and objectives that you'll address in your abstract. This will help you keep your abstract focused and concise, while still capturing the essential aspects of your research.

Reviewing Abstract Guidelines and Requirements

Make sure to review the guidelines and requirements for your abstract before you begin writing. This will help you ensure that you're meeting any specific criteria or word limits that may be in place. You may also want to look at examples of abstracts from other research proposals to get a sense of how they are structured and formatted.

Structuring Your Abstract

Once you have completed your preparations, it's time to begin writing your abstract. Structure is key to creating an effective abstract that accurately conveys the core ideas of your research. Here are some tips for structuring your abstract:

Writing a Clear and Concise Introduction

Your introduction should be brief and to the point, introducing readers to the key ideas and objectives of your research. Make sure to use clear and concise language that accurately summarizes your work.

Summarizing Your Research Methods and Design

In this section, you should provide a brief overview of your research methodology and design. This should include key details such as the study design, sampling method, and data collection approach.

Presenting Your Key Findings and Results

Next, you'll want to outline the most significant findings or results of your research. This may involve providing specific data or statistics to support your claims. Be sure to focus on the most important findings, rather than attempting to summarize everything you've found.

Concluding with the Significance and Implications of Your Research

Finally, you'll want to wrap up your abstract with some thoughts on the significance and potential implications of your research. This may involve making recommendations for future research, or discussing the potential applications of your findings in real-world contexts.

Tips for Writing an Effective Abstract

Now that you have a sense of how to structure your abstract, let's dive into some specific tips and best practices that will help you craft an effective and compelling summary of your research.

Using Clear and Concise Language

One of the most important things you can do when writing an abstract is to use clear and concise language. Avoid using confusing or overly technical terminology whenever possible, and focus on conveying your ideas in a simple and straightforward manner.

Ensuring Coherence and Logical Flow

Your abstract should be well-organized and easy to follow. Make sure that each section flows logically and smoothly into the next, using transition words and phrases to guide readers from one idea to the next.

Avoiding Jargon and Excessive Technical Terms

While it's important to convey your research methodology and results accurately, you should avoid using excessive jargon or technical terms that may confuse readers who are not experts in your field. Use simple language whenever possible, and provide explanations or clarifications where necessary.

Proofreading and Editing Your Abstract

Finally, make sure to thoroughly proofread and edit your abstract before submitting it. Look for any grammatical or spelling errors, and make sure that your language is clear and concise. You may also want to have a colleague or advisor review your abstract to provide feedback and suggestions for improvement.

ChatGPT Prompt for Writing an Abstract for a Research Proposal

Chatgpt prompt.

Please compose a concise and thorough summary of your proposed research project, highlighting the key objectives, methodology, and expected outcomes. Your abstract should provide a clear and compelling overview of the significance and relevance of your study, as well as its potential contributions to the field. Please ensure that your abstract is well-structured, engaging, and accurately reflects the scope and focus of your research proposal.

[ADD ADDITIONAL CONTEXT. CAN USE BULLET POINTS.]

Writing an abstract for a research proposal can seem daunting, but by following the guidelines and tips provided in this article, you should be well-equipped to create a compelling and effective summary of your work. Remember to focus on the most important aspects of your research, use clear and concise language, and organize your ideas in a logical and coherent manner. With these strategies in mind, you'll be able to craft an abstract that accurately represents your research and makes a lasting impression on readers.

Recommended Articles

How to write a winning painting proposal, how to write a 30-60-90 day plan: a step-by-step guide, feeling behind on ai, get the latest ai.

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift